Author Topic: Wiring Indicators  (Read 472 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave B

  • Full Member
  • *
  • Posts: 25
Wiring Indicators
« on: January 25, 2021, 09:21:57 AM »
HI,
IM busy wiring in the new wiring harness on my CB750FO
Im following the colored wiring diagram carefully.
The bit i can't figure out is the diagram shows 3 wires going to each front indicator.
The indicators only have two connectors .
Can anybody help please,
Dave.

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,720
  • Bike almost back to the 70's 2015
Re: Wiring Indicators
« Reply #1 on: January 25, 2021, 09:35:42 AM »
USA bikes have additional position light there.  Just bother about light blue and orange, each side to ground. Diagram show the function and which switch doing what.
« Last Edit: January 25, 2021, 09:37:15 AM by PeWe »
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,358
Re: Wiring Indicators
« Reply #2 on: January 25, 2021, 11:03:06 AM »
The third wire in the diagram is chassis ground. It may not represent a physical wire, just a ground path that must be clean and tight.
« Last Edit: January 25, 2021, 11:05:11 AM by Alan F. »

Offline Dave B

  • Full Member
  • *
  • Posts: 25
Re: Wiring Indicators
« Reply #3 on: January 25, 2021, 11:18:16 AM »
Many thanks
Dave.