Author Topic: Early Sandcast Found......  (Read 90028 times)

0 Members and 42 Guests are viewing this topic.

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,264
  • SOHC4 member # 2605
Re: Early Sandcast Found......
« Reply #250 on: March 25, 2021, 03:13:47 pm »
Painter being warned to not blast the welds smooth and fill them, right? Recall hearing someone crushed by results of blaster and painter prettying it up and as a result the fram no longer looked original after being painted.
David- back in the desert SW!

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Early Sandcast Found......
« Reply #251 on: March 25, 2021, 06:29:55 pm »
 It can get out of hand real fast.. I would just spot in the bare area, then its still 80 percent original...
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #252 on: March 25, 2021, 08:21:16 pm »
Painter being warned to not blast the welds smooth and fill them, right? Recall hearing someone crushed by results of blaster and painter prettying it up and as a result the fram no longer looked original after being painted.

Soft media blast, and a light coating. Nothing extra!

Online Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: Early Sandcast Found......
« Reply #253 on: March 25, 2021, 09:00:16 pm »
Painter being warned to not blast the welds smooth and fill them, right? Recall hearing someone crushed by results of blaster and painter prettying it up and as a result the fram no longer looked original after being painted.

Soft media blast, and a light coating. Nothing extra!

Good job John, those ugly factory welds are proof that it hasn't been messed with. Customisers of the day ground all those delightfully disgusting welds smooth then bondo'd over them again to make the joints even smoother. I prefer my K0's welds factory flawed...... ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #254 on: March 26, 2021, 04:54:09 pm »
Painter being warned to not blast the welds smooth and fill them, right? Recall hearing someone crushed by results of blaster and painter prettying it up and as a result the fram no longer looked original after being painted.

Soft media blast, and a light coating. Nothing extra!



Good job John, those ugly factory welds are proof that it hasn't been messed with. Customisers of the day ground all those delightfully disgusting welds smooth then bondo'd over them again to make the joints even smoother. I prefer my K0's welds factory flawed...... ;D


Met the painter today and guidelines set. He’s busy, so 3-4 weeks. I have lots to do in the meantime.

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #255 on: April 21, 2021, 10:22:42 am »
Moving ahead, slowly.  That’s the plan....... the instruments are out to “cb750Faces”. Still collecting up a few missing parts, stripping and rebuilding a some bits and generally organizing what I need, before I get started. For once, I’d like to have the engine ready FIRST, so I can “lower the frame onto it”. Never started that way...... plan is to make this as the Winter 2021-22 Project bike.

Today I picked up the frame, etc. Decided this one needed to be paint, not powder. A local painter I know agreed to tackle it. Epoxy primer, two coats of lacquer and two clear. It looks great and feels tough enough.Swing arm and frame are paint. I plan on riding this one, so the battery box and “smalls” got powder coated. Progress! .
« Last Edit: April 21, 2021, 10:27:28 am by BenelliSEI »

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,068
  • I love to restore & travel. Keep'em Going Strong !
Re: Early Sandcast Found......
« Reply #256 on: April 21, 2021, 12:11:59 pm »
That looks nice John  8)
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Online Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: Early Sandcast Found......
« Reply #257 on: April 21, 2021, 01:20:33 pm »
Looks good John, and (Imho) paint is the way to go, Honda painted them in the factory, and even though Honda used the cheapest possible paint available with no primer, many original bikes have survived with the OEM paint still looking good.

Is the centre stand original for a sandcast? An “expert” told me that the early K0’s shouldn’t have the little brace on the left hand side “leg” of the stand? My K0 didn’t have a centrestand on it when I bought the frame, so I just grabbed a spare one out of my garage and called it good as I’m not that fussed about originality, but when I saw your stand, well I’m wondering if that “expert” is full of sh1t? ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #258 on: April 21, 2021, 03:13:29 pm »
Looks good John, and (Imho) paint is the way to go, Honda painted them in the factory, and even though Honda used the cheapest possible paint available with no primer, many original bikes have survived with the OEM paint still looking good.

Is the centre stand original for a sandcast? An “expert” told me that the early K0’s shouldn’t have the little brace on the left hand side “leg” of the stand? My K0 didn’t have a centrestand on it when I bought the frame, so I just grabbed a spare one out of my garage and called it good as I’m not that fussed about originality, but when I saw your stand, well I’m wondering if that “expert” is full of sh1t? ;D



Terry....... you’re not the first person to ask about that stand. There is no damage to the frame or hardware, so I’m pretty confident it’s the original. Definitely felt like I was pulling off original parts when I dismantled it.

Most of my restorations get powder, but this one got me thinking a bit differently. I’m keeping a bucket of all the original hardware for fresh zinc and the body work may get straightened, touched up, rubbed down and clear coated..,,,,
« Last Edit: April 21, 2021, 03:31:59 pm by BenelliSEI »

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #259 on: April 21, 2021, 03:26:32 pm »
That looks nice John  8)

Thanks. He finished the clear yesterday and kept it in the slowly cooling powder coat oven over night. I wanted to keep it warm and dry for a few days, so FIRST motorcycle I’ve managed to sneak into the house! The boss says “out by the weekend”.

Offline Prospect

  • Expert
  • ****
  • Posts: 1,171
Re: Early Sandcast Found......
« Reply #260 on: April 21, 2021, 03:32:26 pm »
I'm pretty sure the early sandcast didn't have the brace. Mine doesn't have it. Not sure when they started to put one in.
Looks good John, and (Imho) paint is the way to go, Honda painted them in the factory, and even though Honda used the cheapest possible paint available with no primer, many original bikes have survived with the OEM paint still looking good.

Is the centre stand original for a sandcast? An “expert” told me that the early K0’s shouldn’t have the little brace on the left hand side “leg” of the stand? My K0 didn’t have a centrestand on it when I bought the frame, so I just grabbed a spare one out of my garage and called it good as I’m not that fussed about originality, but when I saw your stand, well I’m wondering if that “expert” is full of sh1t? ;D



Terry....... you’re not the first person to ask about that stand. There is no damage to the frame or hardware, so I’m pretty confident it’s the original. Definitely felt like I was pulling off original parts when I dismantled it.
Current Bikes

1969 CB750  Sandcast #256
1971 CB750K1
1972 CB750K1
1975 CB400F
1975 GL1000 Goldwing
1954 Harley Davidson Panhead
1957 Harley Davidson Panhead

Toronto Canada

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,264
  • SOHC4 member # 2605
Re: Early Sandcast Found......
« Reply #261 on: April 21, 2021, 04:28:30 pm »
She realizes the investment given it is a 20k+ bike after finished...
David- back in the desert SW!

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,769
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Early Sandcast Found......
« Reply #262 on: April 21, 2021, 04:54:42 pm »
My mentor Jimbo had the first sandcast sold in Peoria, IL in 1969 at our shop. It didn't have the little brace on it's sidestand.
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Online Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: Early Sandcast Found......
« Reply #263 on: April 21, 2021, 05:03:06 pm »
Yep, the “K0 Expert” told me that the early die cast K0’s didn’t either, but Mine is a 1/70 build, so I figured that no-one would care. If the worst became the worst you could just cut it off, but I don’t see the point, Honda must have put it there for a reason. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #264 on: April 21, 2021, 07:05:15 pm »
Yep, the “K0 Expert” told me that the early die cast K0’s didn’t either, but Mine is a 1/70 build, so I figured that no-one would care. If the worst became the worst you could just cut it off, but I don’t see the point, Honda must have put it there for a reason. ;D

My early ‘70 has one too. I’ll compare and see if they are the same? I’m building this one “as found”.

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #265 on: April 21, 2021, 08:27:50 pm »
Terry.....Here’s a photo of another S/C, 100012XX (only a few before mine) and guess what? Braced side stand.......
« Last Edit: April 21, 2021, 08:30:27 pm by BenelliSEI »

Online Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: Early Sandcast Found......
« Reply #266 on: April 21, 2021, 08:34:29 pm »
Terry.....Here’s a photo of another S/C, 100012XX (only a few before mine) and guess what? Braced side stand. So much for the EXPERTS.

Very true John, we all know about “Experts”, but I have seen K0’s without the brace too, so who knows? There were 4 different K0 heads, a couple different sets of carbs, different shift mechanisms, fenders, etc etc, so who really knows what they came out with, and what may have been changed over the years? It’s a mystery! ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Early Sandcast Found......
« Reply #267 on: April 21, 2021, 11:06:53 pm »
Its a bit like the frames, early ones have horn on left side.... many people have never seen it , or maybe never noticed.
Now centerstands.. they did get removed for some pipes or to save weight.... and then sometimes they get back put on. And then if you have a few around its like... this one looks good..lets use it..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Online Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: Early Sandcast Found......
« Reply #268 on: April 22, 2021, 12:49:05 am »
Just to add more confusion, I pulled out my K0 owners manual and took a look, and look Ma, no side brace!

K0 manual by Terry Prendergast, on Flickr

K0 manual 1 by Terry Prendergast, on Flickr

But right when you think you have the "definitive" answer, look closely and you'll see this bike is a "prototype", not the garden variety sandcast or diecast. I must check the factory parts manual and see if there are two (or more) different part numbers for center stands for K0's. Fascinating! (sort of.....) ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Early Sandcast Found......
« Reply #269 on: April 22, 2021, 02:26:52 am »
 As far as I know there is.. I found around 50 pieces that changed between  first sandcast and last ones... .. during my study of revisions in the old partsbook I have..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline britman

  • Hot Shot
  • ***
  • Posts: 560
Re: Early Sandcast Found......
« Reply #270 on: April 22, 2021, 05:39:07 am »
That looks nice John  8)

Thanks. He finished the clear yesterday and kept it in the slowly cooling powder coat oven over night. I wanted to keep it warm and dry for a few days, so FIRST motorcycle I’ve managed to sneak into the house! The boss says “out by the weekend”.

Damn that looks beautiful.  I can only get away with the smuggling MC bits in the house thing doing the winter.  There is almost an unwritten list, tires to be mounted-must be hidden under the Grand-daughters bed, gas tanks treated with Caswell and small painted bits-in the back bed room next to the heating vent.  There is not a specified staying time, but it is close to a New York City cab driver's reaction time before blowing the horn at a red light. 

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #271 on: April 22, 2021, 06:59:50 am »
As far as I know there is.. I found around 50 pieces that changed between  first sandcast and last ones... .. during my study of revisions in the old partsbook I have..

Frank.... I joined the “Sandcast Only” forum. They take it to the limit. I may take some liberties...

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Early Sandcast Found......
« Reply #272 on: April 22, 2021, 06:56:25 pm »
Just read that really early bikes did not have the rubber guide for the speedo cable, in the front fender. Checked mine and sure enough, no hole, no guide. Learned something today?

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Early Sandcast Found......
« Reply #273 on: April 22, 2021, 09:44:14 pm »
Should not have rubber boot on brake hose where it enters caliper , on that.
 And the metal end pipe part of hose is very short...
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Online Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: Early Sandcast Found......
« Reply #274 on: April 22, 2021, 10:33:42 pm »
OK, so after much "Research" (in other words I looked at my OEM parts manual) The jury is definitely in:

CB750 Centre Stand 5 by Terry Prendergast, on Flickr

CB750 Centre Stand 3 by Terry Prendergast, on Flickr

CB750 Centre Stand 4 by Terry Prendergast, on Flickr

CB750 Centre Stand by Terry Prendergast, on Flickr

Yes, dear reader, all "Experts" bullsh1t aside, ALL CB750's from the earliest of sandcasts to the K4 (inclusive, my manual only goes to 1974) have the exact same centre stand. I'm happy about that, as I was contemplating "modifying" my centre stand with my "Non-OEM" Angle grinder. John, you can rest in the knowledge that the stand on your bike is probably the same one it was born with, and once again, all's right with the world....... ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)