Author Topic: dummy light dust covers (Read 1008 times)

evinrude7 · « **on:** February 07, 2021, 06:05:32 PM »

is anyone doing a repop on these? seems oem is scarce or nonexistent.

bryanj · « **Reply #1 on:** February 07, 2021, 06:14:16 PM »

No idea what you are asking about

evinrude7 · « **Reply #2 on:** February 07, 2021, 06:22:43 PM »

Quote from: bryanj on February 07, 2021, 06:14:16 PM

No idea what you are asking about

these. see photo. i realize it was originally sold as one part but many have asked about just the rubber boots, including myself.

dave500 · « **Reply #3 on:** February 07, 2021, 10:39:15 PM »

idiot lights.

bryanj · « **Reply #4 on:** February 08, 2021, 01:14:16 AM »

Never seen just the boots but have seen the whole thing as a pattern part just not sure where. Try putting the Honda part number into google

flatlander · « **Reply #5 on:** February 08, 2021, 01:18:07 AM »

i think Z1 may have the complete bundle. the boots alone i've never seen sold separately.

bryanj · « **Reply #6 on:** February 08, 2021, 04:10:01 AM »

Yamiya list it at about $50 plus shipping 37581323000

Rookster · « **Reply #7 on:** February 08, 2021, 05:27:29 AM »

I think you can get just the boots from Marcel at https://www.cb750faces.com/en/ They should be the same as the boots that go in the early gauges.
Scott

bryanj · « **Reply #8 on:** February 08, 2021, 06:17:39 AM »

Not listed on his site

StockRider · « **Reply #9 on:** February 08, 2021, 06:27:11 AM »

Looks like they are there under all of the CB750 models...

https://www.cb750faces.com/en/honda-cb750-k0-sandcast/102-rubber-housing-for-lamp-socket-honda-cb750-gauges.html

JWB · « **Reply #10 on:** February 08, 2021, 06:38:17 AM »

I ordered them from cb750faces. Here is a link: https://www.cb750faces.com/en/honda-cb750-k0-sandcast/102-rubber-housing-for-lamp-socket-honda-cb750-gauges.html
Too big for my 74 550, but with a bit of work I got them to fit but that is understandable since they are made for a 750.

Alan F. · « **Reply #11 on:** February 08, 2021, 08:52:21 AM »

EBay seller Vintage Avenue appears to have them too, shipping from Thailand.

https://www.ebay.com/itm/HONDA-CB500-CB550-CB750-INDICATOR-LIGHT-DASH-PANEL-PILOT-WIRE-HARNESS-TW426-/154152010990?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=154152010990&targetid=1068611325746&device=m&mktype=pla&googleloc=9001898&campaignid=11615611592&mkgroupid=112424611639&rlsatarget=pla-1068611325746&abcId=9300455&merchantid=101649905&gclid=Cj0KCQiA34OBBhCcARIsAG32uvMbwZr1GNvlvmpUjSahhjMVES2GT8xti2eK-53sjIr1l3g7vcu9G9caAqD8EALw_wcB&pageci=70f984bc-7e2c-4405-812f-810777f7c750

bryanj · « **Reply #12 on:** February 08, 2021, 09:04:22 AM »

Bit dubious of that item as no other items for sale and ebay shop empty

bryanj · « **Reply #13 on:** February 08, 2021, 09:21:24 AM »

Z1 do do them but they appear to be out of stock at present, personaly i find their wesite unfreindly and clunky

Alan F. · « **Reply #14 on:** February 08, 2021, 09:42:36 AM »

I agree on both counts.

mrbreeze · « **Reply #15 on:** February 08, 2021, 11:40:25 AM »

I looked into this a few months ago. Z1 listed them but were out of stock. Yamiya had them and I pulled the trigger but then they messaged me back and wanted more money for shipping because of covid so I declined. I think the part was around $25 but all the shipping jacked it to around $80.

Maltboy · « **Reply #16 on:** February 09, 2021, 07:32:07 PM »

I was able to snag a bulb harness from Z1 a few months ago for $30. Quality looks good. Definitely better than the deteriorated 45 year old set that came with the bike. They sell out pretty quick. I ordered them as soon as I got the "in stock" notification.

Kenzo1979 · « **Reply #17 on:** February 09, 2021, 08:18:00 PM »

Did some research and came across this at Denniskirk. I’m sure if you dig a little deeper you can find out who manufactures/wholesales them; Digikey, McMaster-Carr, etc. I hate spending double digit money on a piece of rubber about the size of a fingertip. Even if these aren’t the exact size, for four dollars a pop, Worth seeing if you could make it work.

[/URL] https://www.denniskirk.com/drag-specialties/replacement-rubber-push-in-socket-bulb-for-mini-gauges-ds-243804.ph22031.prd/H22031.sku[/URL]

Sent from my iPhone using Tapatalk

evinrude7 · « **Reply #18 on:** February 09, 2021, 08:32:04 PM »

much more exists than i thought. thanks for all the info.

evinrude7 · « **Reply #19 on:** February 09, 2021, 08:34:53 PM »

Quote from: bryanj on February 08, 2021, 09:21:24 AM

Z1 do do them but they appear to be out of stock at present, personaly i find their wesite unfreindly and clunky

i agree. they just gobbled up a few other smaller companies and it's sort of become vanilla from as appearance stand point.

The Lone Builder · « **Reply #20 on:** February 10, 2021, 12:57:37 AM »

Quote from: JWB on February 08, 2021, 06:38:17 AM

I ordered them from cb750faces. Here is a link: https://www.cb750faces.com/en/honda-cb750-k0-sandcast/102-rubber-housing-for-lamp-socket-honda-cb750-gauges.html
Too big for my 74 550, but with a bit of work I got them to fit but that is understandable since they are made for a 750.

I got some from Marcel and used them successfully on my 400F.

Removing and replacing teh wires was a bit of a struggle, but they fit perfectly.

bryanj · « **Reply #21 on:** February 10, 2021, 06:34:29 AM »

The harness is same part number for 500,550 and 750 so should fit all of them the same

News:

Author Topic: dummy light dust covers (Read 1008 times)