Author Topic: Post evaporust treatment.  (Read 734 times)

0 Members and 2 Guests are viewing this topic.

Offline evinrude7

  • not a kung-fu
  • Master
  • *****
  • Posts: 2,099
  • something to hüsker
Post evaporust treatment.
« on: February 25, 2021, 01:17:31 PM »
Had some nuts, bolts and washers come out very nice after using evaporust. Some have since started to show surface rust. Any suggestions on keeping them rust free? Thanks.

Sent from my moto g(7) using Tapatalk

cb750 k6 - ugly

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,488
Re: Post evaporust treatment.
« Reply #1 on: February 25, 2021, 03:25:46 PM »
Any oily type substance

Sent from my LM-X420 using Tapatalk

mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,351
Re: Post evaporust treatment.
« Reply #2 on: February 25, 2021, 03:57:03 PM »
DIY zinc plating.

Offline evinrude7

  • not a kung-fu
  • Master
  • *****
  • Posts: 2,099
  • something to hüsker
Re: Post evaporust treatment.
« Reply #3 on: February 25, 2021, 06:40:01 PM »
DIY zinc plating.

i'll look it up. 
cb750 k6 - ugly

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,351

Offline evinrude7

  • not a kung-fu
  • Master
  • *****
  • Posts: 2,099
  • something to hüsker
cb750 k6 - ugly

Offline jgger

  • Master
  • *****
  • Posts: 2,345
Re: Post evaporust treatment.
« Reply #6 on: February 25, 2021, 10:53:15 PM »
Automotive spray wax, usually it is silicone based. I have used it in an old shotgun barrel that kept rusting and was pleasantly suprised.
"The SOHC4 uses a computer located about 2-3 ft above the seat.  Those sometimes need additional programming." -stolen from  Two Tired

The difference between an ass kisser and brown noser is merely depth perception.  Stolen from RAFster122s