Topic: Fuel Tap

[wildtapholer]

Hi all another part question, here is a picture of my fuel tap what I have removed while the tank gets a new coat of paint, my question is, is this the correct tap because looking at an exploded view on the parts list it only shows a tap with 1 pipe which goes into the tank, and my fuel tap has 2, each with it's own filter. Every fuel tap I have looked at has only 1 feed in the tank, I just need to know if this is another part what has been taken off another bike to fit. No pic it keeps ending up more than 5mb and won't send.

[dusterdude]

What kind of bike?

Sent from my LM-X420 using Tapatalk

[wildtapholer]

Honda CB400f 1977

[dusterdude]

The petcock has 1 outlet that goes in the tank and 1 that goes to the carbs

Sent from my LM-X420 using Tapatalk

[dusterdude]

Here's a pic

Sent from my LM-X420 using Tapatalk

[wildtapholer]

Mine has 2 what go in the tank and 1 that goes to the carbs, so I have to assume it is not the correct fuel tap that is fitted.

[dusterdude]

Question is,does your fuel tap work?

Sent from my LM-X420 using Tapatalk

[wildtapholer]

Yes it does work, but before you say why bother then. Does anyone else have a CB400f with this tap fitted, if I needed a part for it what bike is it off, I'd like the bike standard for the purists and that's another reason why I had the bike repainted in Antares Red and not any red, the fuel tap is not fitted yet, I'm giving the lacquer plenty of time to harden.

[wildtapholer]

I've just managed to work out how to trim the photo down to less that 4mb so here's a pic of the fuel tap.

[wildtapholer]

After looking closely at the exploded view of the tank picture, it looks to be the correct tap but mine has an extra line?