Author Topic: Maui Z1 1973  (Read 47438 times)

0 Members and 1 Guest are viewing this topic.

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,835
Re: Maui Z1 1973
« Reply #475 on: October 03, 2021, 07:49:34 PM »
As a Honda owner, I think you will find that single disc adequate for sedate riding.   The Kawi caliper is MUCH more powerful than a cb750
If it works good, it looks good...

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,319
  • So, what do ya wanna talk about today?
Re: Maui Z1 1973
« Reply #476 on: October 05, 2021, 03:00:50 AM »
Good job on the switches Steve, I restored some CB750 switches years ago, I painted them with engine enamel, then used waterbased model paint. I just slopped the paint in with a little artists brush, and then just wiped off the excess with a wet rag. The water based paint, when dry is just as water proof as enamel, but won't react with the engine enamel when wet, so no smearing issues, and won't affect the gloss of the black paint when you wipe the wet rag over it. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,368
  • SOHC4 member # 2605
Re: Maui Z1 1973
« Reply #477 on: October 10, 2021, 05:34:36 PM »
David- back in the desert SW!

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #478 on: October 11, 2021, 08:09:42 AM »
Yes, I saw that, it's pretty controversial since some folks are making it bad for everyone. Here on Maui there is a growing sense that tourism needs some controls and is out of hand. Just last week I saw a guy in a camper van dumping his porta potty tanks by the side of the road. Gross. Short term rental properties are also a sore subject since they deprive working people rental property. It's a pretty hot subject.
The good news is our Covid numbers are way down so they are thinking of loosening up. I hope folks don't go crazy and make the numbers climb.
My Z1 project has been on hold while my tires and tubes are being sent. When it all gets here I'll see if I can get a rolling frame up so I can put the engine lower half back in. Then it's going to start taking shape. In the mean time, I have some honey do's.
I'm also working on the brake components since I decided to not go dual discs, at least for now.
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #479 on: October 13, 2021, 02:01:47 PM »
I received my Duro tires. They look almost exactly like the Continentals that I put on my K3 750. Oh well, they should get me by for a start. They may be fine for what I’ll be doing. I don’t ride like a 20 year old any more. :-))
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline Kelly E

  • Geriatric Hooligan
  • Master
  • *****
  • Posts: 2,365
Re: Maui Z1 1973
« Reply #480 on: October 13, 2021, 06:25:43 PM »
Yes, I saw that, it's pretty controversial since some folks are making it bad for everyone. Here on Maui there is a growing sense that tourism needs some controls and is out of hand. Just last week I saw a guy in a camper van dumping his porta potty tanks by the side of the road. Gross. Short term rental properties are also a sore subject since they deprive working people rental property. It's a pretty hot subject.
The good news is our Covid numbers are way down so they are thinking of loosening up. I hope folks don't go crazy and make the numbers climb.
My Z1 project has been on hold while my tires and tubes are being sent. When it all gets here I'll see if I can get a rolling frame up so I can put the engine lower half back in. Then it's going to start taking shape. In the mean time, I have some honey do's.
I'm also working on the brake components since I decided to not go dual discs, at least for now.

We had a family condo just south of Kailua Kona on Alli Dr. since the late 70's. It was recently sold, I'm going to miss it but I will not miss a majority of the tourists I have met there during the last ten years. Between thy littering and the I can do whatever I want attitude I'll stay home instead. We can still go stay at the off-grid cabin south of Hilo if we feel the urge to go back.
Never Give Up - Never Surrender

The Rust Bros. Garage Collection
1974 Honda CB 550 K0                                            1971 MGB/GT
1975 Honda CB 400F Super Sport                          1972 MGB/GT
1977 Kawasaki KZ 1000 LTD                                   1985 GMC S15
1978 Kawasaki KL 250
1980 Suzuki GS 1100E
1982 Honda CB 900F Super Sport
1983 Honda CB 1100F
1984 Honda VF 700S Sabre
1984 Honda VF 1000F Interceptor
1990 Moto Guzzi 1000 Le Mans
1994 Kawasaki Concours ZG 1000A9
2005 Harley Davidson Fat Boy

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,148
  • I love to restore & travel. Keep'em Going Strong !
Re: Maui Z1 1973
« Reply #481 on: October 13, 2021, 08:47:17 PM »
Yes, I saw that, it's pretty controversial since some folks are making it bad for everyone. Here on Maui there is a growing sense that tourism needs some controls and is out of hand. Just last week I saw a guy in a camper van dumping his porta potty tanks by the side of the road. Gross. Short term rental properties are also a sore subject since they deprive working people rental property. It's a pretty hot subject.
The good news is our Covid numbers are way down so they are thinking of loosening up. I hope folks don't go crazy and make the numbers climb.
My Z1 project has been on hold while my tires and tubes are being sent. When it all gets here I'll see if I can get a rolling frame up so I can put the engine lower half back in. Then it's going to start taking shape. In the mean time, I have some honey do's.
I'm also working on the brake components since I decided to not go dual discs, at least for now.

We had a family condo just south of Kailua Kona on Alli Dr. since the late 70's. It was recently sold, I'm going to miss it but I will not miss a majority of the tourists I have met there during the last ten years. Between thy littering and the I can do whatever I want attitude I'll stay home instead. We can still go stay at the off-grid cabin south of Hilo if we feel the urge to go back.

Kailua-Kona is where they have the finish of the Ironman Triathlon? I was there in 1986 and saw some of the tired 'Finishers' coming in.
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Kelly E

  • Geriatric Hooligan
  • Master
  • *****
  • Posts: 2,365
Re: Maui Z1 1973
« Reply #482 on: October 13, 2021, 10:19:02 PM »
Yep it's the Ironman triathlon finish. The turn around buoy for the swim leg is straight out from the condo. I've sat out on the deck eating breakfast and watching the swimmers. I think it was in 94'.
Never Give Up - Never Surrender

The Rust Bros. Garage Collection
1974 Honda CB 550 K0                                            1971 MGB/GT
1975 Honda CB 400F Super Sport                          1972 MGB/GT
1977 Kawasaki KZ 1000 LTD                                   1985 GMC S15
1978 Kawasaki KL 250
1980 Suzuki GS 1100E
1982 Honda CB 900F Super Sport
1983 Honda CB 1100F
1984 Honda VF 700S Sabre
1984 Honda VF 1000F Interceptor
1990 Moto Guzzi 1000 Le Mans
1994 Kawasaki Concours ZG 1000A9
2005 Harley Davidson Fat Boy

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #483 on: October 17, 2021, 08:53:49 AM »
Still waiting for some stuff so I can go to the next step. I need tubes to mount tires so I can stand the frame up. The chrome is not back yet from SoCal, I hope it's good chrome, should be for the price. My gauges are on their way back from Marcel, another bank breaker. After the frame is on wheels, the lower half of the lump goes in.
A real slow down period. It's ok though, I had some honeydo's to take care of.
1973 CB 750 K3
10/72 build Z1 Kawasaki

ken65

  • Guest
Re: Maui Z1 1973
« Reply #484 on: October 17, 2021, 03:07:04 PM »
The paint on the engine looks great.  The prep work is evident.  Good job.

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #485 on: October 18, 2021, 08:06:21 AM »
I have become very attached to my siphon gun bead blaster setup, I should have gotten one a long time ago. Yesterday I messed around with some walnut shells to restore a plant stand for my wife. They aren't very aggressive but they work, I just set up near a planting area and blasted away. Biodegradable! The stand only had light rust, came out fine.
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,368
  • SOHC4 member # 2605
Re: Maui Z1 1973
« Reply #486 on: October 18, 2021, 11:25:29 AM »
Any blasting, especially sand if using a siphon blaster needs to Flow freely and moisture in the media is a kiss of death,...so, keep your abrasive sand media dry.
David- back in the desert SW!

Offline craz1

  • Enthusiast
  • **
  • Posts: 247
  • CDA, Idaho
Re: Maui Z1 1973
« Reply #487 on: October 19, 2021, 02:01:32 PM »
Let us know how the gauges look when they come back. All the gauges I have had done were by Zresto https://www.zresto.com.m My CB550 gauges were done by Marcel and were excellent.
74 CB550,73 Z1900, 74 Z1900, 75 Z1900,
72 XS2650, 73 RD350, 2013 FJR1300, 84 XJ550 YAM

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,324
  • Central Texas
Re: Maui Z1 1973
« Reply #488 on: October 19, 2021, 02:25:58 PM »
Let us know how the gauges look when they come back. All the gauges I have had done were by Zresto https://www.zresto.com.m My CB550 gauges were done by Marcel and were excellent.

Hey Crazy1...that looks like a good resource.  I used Marcel for my K1 gauges, shipping was expensive!
For my H1 & H2, a Triples forum member in FL did mine and did a great job [w/cheap shipping]
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #489 on: October 21, 2021, 08:08:33 AM »
NL post just notified me they are on the way. I'll post photos when they arrive.
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #490 on: October 28, 2021, 07:56:47 PM »
Gauges got here, Marcel does nice work.
Waiting for chrome still.
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,148
  • I love to restore & travel. Keep'em Going Strong !
Re: Maui Z1 1973
« Reply #491 on: October 28, 2021, 10:58:52 PM »
Those fresh speedo/tach are looking nice Steve:Full-On resto.  ;)
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

ken65

  • Guest
Re: Maui Z1 1973
« Reply #492 on: October 29, 2021, 01:36:51 AM »
sharp job. look great.

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,368
  • SOHC4 member # 2605
Re: Maui Z1 1973
« Reply #493 on: October 29, 2021, 02:25:34 AM »
Very nice. If ya gotta ask how much you cannot afford it...
I can't
David- back in the desert SW!

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,319
  • So, what do ya wanna talk about today?
Re: Maui Z1 1973
« Reply #494 on: October 29, 2021, 03:37:31 AM »
They look great. I had Marcel restore a set of K0 gauges for me, compared to NOS gauges, they were cheap. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #495 on: October 29, 2021, 08:24:10 AM »
That's it, NOS gauges for an early Z1 are pretty tough to find.
Marcel really does a great job, they look perfect, he told me the internals were pretty bad.
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,324
  • Central Texas
Re: Maui Z1 1973
« Reply #496 on: October 29, 2021, 08:35:08 AM »
Gauges got here, Marcel does nice work.


There is no doubt, always great workmanship. Seemed the turnaround time was relatively quick?
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,368
  • SOHC4 member # 2605
Re: Maui Z1 1973
« Reply #497 on: October 29, 2021, 09:17:30 AM »
Glad he was able to fix them up for you and they look great now! Worth it and compared to rechroming anything these days...a bargain.
David- back in the desert SW!

Offline craz1

  • Enthusiast
  • **
  • Posts: 247
  • CDA, Idaho
Re: Maui Z1 1973
« Reply #498 on: October 29, 2021, 12:42:53 PM »
Yes the gauges look good. I think he will get my 75 Z1 gages. He must be catching up. My CB550 gauges took 5 months.
74 CB550,73 Z1900, 74 Z1900, 75 Z1900,
72 XS2650, 73 RD350, 2013 FJR1300, 84 XJ550 YAM

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,283
  • Old guy
Re: Maui Z1 1973
« Reply #499 on: October 30, 2021, 08:22:44 AM »
They took about two months, not bad.
1973 CB 750 K3
10/72 build Z1 Kawasaki