Topic: Carb Electronic Syncronizer for My Hona CB500K2

[ANDREAS MILKE]

People;

I mada a Carb Electronic Syncronizer for My Hona CB500K2, I used Bosch Car Map sensors and some electronics parts and an Arduino to make my device.

I can read Absolute pressure, VAcuum and two Syncro carbs on a LCD display.  Now I can use this instead my vacuum gauges....
 
Pictures attached.
 

[goodtryer]

Great ingenuity!

[craz1]

Looks nice. I still use my mercury gages I made many years ago. I have used the newer Motion Pro carb tuner and the Morgan Tune but both have me trouble after some use. I have been looking at this tool, looks like a nice tool if you cant build your own.
https://thedigisync.com

[Ryan66]

Looks nice. I still use my mercury gages I made many years ago. I have used the newer Motion Pro carb tuner and the Morgan Tune but both have me trouble after some use. I have been looking at this tool, looks like a nice tool if you cant build your own.
https://thedigisync.com

Any reviews or videos out there for this? First im hearing of it and its peked my interest. I need to invest in a carb sync tool and this looks pretty good. And not all that much more then an analog setup.

[StockRider]

Looks nice. I still use my mercury gages I made many years ago. I have used the newer Motion Pro carb tuner and the Morgan Tune but both have me trouble after some use. I have been looking at this tool, looks like a nice tool if you cant build your own.
https://thedigisync.com

Any reviews or videos out there for this? First im hearing of it and its peked my interest. I need to invest in a carb sync tool and this looks pretty good. And not all that much more then an analog setup.

I can't track down my Morgan Carbtune, after moving a few too many times. I've been tempted to pull the trigger on the DigiSync. I haven't seen much talk around here about it. There is a thread with a decent amount of info over at advrider (https://advrider.com/f/threads/new-digi-sync-digital-carb-sync-tool.1245504/)

ANDREAS MILKE: Great work on building your own system!

[craz1]

Digisync has been around for a while. I have been trying to get my friend who owns (2) 6 cylinder CBX's to buy one. The Morgan tune I have used ended up getting gummed up and pretty much was useless.

[ANDREAS MILKE]

Craz1, Digisync really is a great product.
I live in brazil, import costs are very high for us. A purchase of one hundred and fifty dollars costs us more than four hundred and sixty dollars .... Because of this it became "cheaper" to make my own synchronizer. If I had a six-cylinder CBX and I lived in the USA, I would definitely buy a Digisync.
I have an original 1973 CB500K2,
without the original 4x4 exhausts

[ANDREAS MILKE]

Hello:

I made another CArb Syncronyzer up to 4 carbs.
This device can read 4 carbs, I used Bosch automotive MAP sensors.
Now I can use for my CB500K2 bike.

[Stev-o]

Nice job!

[Kelly E]

We have a DigiSync four channel. It works great and is easy to use. It also has an accurate tach to help with tuning.

[KennyRedman]

Hello:

I made another CArb Syncronyzer up to 4 carbs.
This device can read 4 carbs, I used Bosch automotive MAP sensors.
Now I can use for my CB500K2 bike.

This is really cool. Care to share some plans or diagrams on how you built it? Sounds like a fun project.