Author Topic: Assembly and Discussion of the Right-hand Switch (a rebuilder's guide)  (Read 99952 times)

0 Members and 2 Guests are viewing this topic.

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,355
After crunching down all of those other bikes that used the same exact right hand side switch pod, this is the list of switch pods that'll be an exact replacement:

1975 CB750F
1976 CB750F
1977 CB550F
1976 CB550F
1976 CB360T
1977 CB400F
1976 CB400F
1976 GL1000LTD
1976 GL1000
1976 CB750K
1976 CB550K

Offline YoungBlood

  • Enthusiast
  • **
  • Posts: 188
  • 1975 Honda Cb750F
THANK YOU!!!!!!!!!!!!!!!!!  ;D ;D ;D

Awesome, I am going to pick up one from Ebay. Hopefully all these wacky electrical troubles cease and desist soon.
When you're going through hell, give it some more gas.

Offline amirsafayan

  • Full Member
  • *
  • Posts: 4
Re: Assembly and Discussion of the Right-hand Switch (a rebuilder's guide)
« Reply #102 on: September 04, 2021, 06:15:40 AM »
Hello everyone,

Has this post been saved elsewhere with the pics?  I've got my CL175 right hand switch back together - but I was not able to secure the main cable bundle with the factory clip and small screw into the lower portion of the right hand switch - like it was when I de - assembled it.   

Thanks,

Amir

Offline Accolay

  • Hot Shot
  • ***
  • Posts: 709
Re: Assembly and Discussion of the Right-hand Switch (a rebuilder's guide)
« Reply #103 on: September 04, 2021, 05:28:19 PM »
I'll do a deep dig and see if I can find any of the pictures from when I de-assembled my switch.
1977 CB550F