Author Topic: Let's see your cool bike stuff, show me yours I'll show you mine. (Read 1883 times)

Don R · « **on:** November 13, 2021, 01:36:05 AM »

Terry wanted to see some better pics of the parts I lucked into. I thought a lot of us have something in the shop or on a bike we would like to show our friends here.
So, I'll go first since I can post a pic now. I cleaned these up just a little, filled in the recess with a sharpie.

Kevin · « **Reply #1 on:** November 13, 2021, 03:17:22 AM »

Those are super cool Don!
Here's a couple of things I have for my CB400F that I am looking forward to installing.
Ti header
Yoshi ST1-M cam

Kevin · « **Reply #2 on:** November 13, 2021, 03:23:49 AM »

Also, a dry clutch and 28mm FCR carbs ;-)

Sent from my SM-N960F using Tapatalk

Don R · « **Reply #3 on:** November 13, 2021, 07:50:18 AM »

I'd bet that it makes a wonderful noise. I had one with a supertrapp muffler, a neighbor kid heard me go by and followed me home. Would not leave until I sold it to him. Later on, I bought it back so he could add to the down payment on his house.

Don R · « **Reply #4 on:** November 13, 2021, 07:56:22 AM »

As advertised by Yamiya, Rockheart oil cooler. I have not found the bolt extension yet.

Medyo Bastos · « **Reply #5 on:** November 13, 2021, 08:27:12 AM »

You can use the extension off a dohc

Sent from my iPhone using Tapatalk

Don R · « **Reply #6 on:** November 13, 2021, 08:37:32 AM »

Cool, HA! see what I did there? Thanks, I was wondering about that and the good news is I already have one under the bed.

Medyo Bastos · « **Reply #7 on:** November 13, 2021, 08:59:51 AM »

Im thinking the space under your bed is going to fill up quickly!

Sent from my iPhone using Tapatalk

Don R · « **Reply #8 on:** November 13, 2021, 06:27:28 PM »

A new pic. Marzochhi? 37mm and the stem is shorter than a cb750, by about an inch or so. I thought gl1000 to cb750 but nope. It's quite sturdy. The ones I saw on ebay are for dirt bikes, penton etc,

Don R · « **Reply #9 on:** November 28, 2021, 07:43:20 AM »

more stuff, still learning what some of it does.

BenelliSEI · « **Reply #10 on:** November 28, 2021, 08:14:05 AM »

Race engine from my Rickman CR project. Haven’t opened it up yet, but full of goodies, including Carrillo rods......

Don R · « **Reply #11 on:** November 28, 2021, 10:44:04 AM »

nice

BenelliSEI · « **Reply #12 on:** November 28, 2021, 11:38:32 AM »

Quote from: Don R on November 28, 2021, 10:44:04 AM

nice

Unfortunately the side covers and main cases have been modified so much (lightened) that a starter motor can’t be installed. Otherwise, a softer cam may have been all I needed to use it. Still pondering.

Don R · « **Reply #13 on:** November 28, 2021, 09:42:15 PM »

I'm hoping mine just has a frost plug in the starter hole. We shall see.

Don R · « **Reply #14 on:** November 28, 2021, 10:06:02 PM »

Shaved Rotor, the po said it won't support electric start. I won't mind charging it after a ride.

BenelliSEI · « **Reply #15 on:** November 30, 2021, 01:24:50 PM »

Quote from: Don R on November 28, 2021, 09:42:15 PM

I'm hoping mine just has a frost plug in the starter hole. We shall see.

The racers ground the two posts out that retain the back of the starter. I may try and make new ones to weld back......

Don R · « **Reply #16 on:** November 30, 2021, 10:04:33 PM »

I haven't looked for that yet. Thes carb rubbers came in the mail. UPP racing brand, not Sudco. I wonder if they're 3D printed? I already heard how nasty those pods are. I had them put on a kz that came with foam unipods on it, they rotted off on my way home.
I'd like to find a filter element and make a breadbox style housing.

dragracer · « **Reply #17 on:** November 30, 2021, 10:38:28 PM »

Quote from: Don R on November 30, 2021, 10:04:33 PM

I haven't looked for that yet. Thes carb rubbers came in the mail. UPP racing brand, not Sudco. I wonder if they're 3D printed? I already heard how nasty those pods are. I had them put on a kz that came with foam unipods on it, they rotted off on my way home.
I'd like to find a filter element and make a breadbox style housing.

What's your opinion on the quality and fit of the boots??

Medyo Bastos · « **Reply #18 on:** December 01, 2021, 12:04:03 PM »

Yeah, what uglee frankie said???

Sent from my iPhone using Tapatalk

dragracer · « **Reply #19 on:** December 01, 2021, 04:31:07 PM »

Quote from: Medyo Bastos on December 01, 2021, 12:04:03 PM

Yeah, what uglee frankie said???

Sent from my iPhone using Tapatalk

I'm glad my friends like me. Lol.

Don R · « **Reply #20 on:** December 01, 2021, 04:53:21 PM »

What's your opinion on the quality and fit of the boots??
[/quote]

So far so good. I haven't installed clamps yet but they snapped on the carbs and intake pretty well with no lube. Looking at the pic, the center two look wrong but I don't think they would go on any other way. They don't have the carb numbers cast in.

Don R · « **Reply #21 on:** December 01, 2021, 04:57:30 PM »

https://andrewsmotorsports.mybigcommerce.com/honda-cb750k1-k5-cb750-76-cb750f76-cb750-sohc-vm29-manifold-kit-005-026/
They shipped right away but it was the only set in stock, hopefully they can get more asap.

News:

Author Topic: Let's see your cool bike stuff, show me yours I'll show you mine. (Read 1883 times)