« previous next »
Pages: 1 ... 3 4 [5] 6   Go Down

Author Topic: Dewey’s CB750 K2  (Read 8247 times)

0 Members and 2 Guests are viewing this topic.

Online newday777

  • Really Old Timer ...
  • *******
  • Posts: 5,256
  • Avatar is my 76 K6 in Colorado w/Cody on back 1980
Re: Dewey’s CB750 K2
« Reply #100 on: September 14, 2023, 05:23:31 PM »
Logged
Stu
Honda Parts manager in the mid 1970s Nashua Honda
My current rides
1975 K5 Planet Blue my summer ride, it was a friend's bike I worked with at the Honda shop in 76, lots of fun to be on it again
1976 K6 Anteres Red rebuilding project, was originally my brother's that I set up from the crate, it'll breath again soon!
Project 750s, 2 K4, 2 K6, 1 K8
2008 GL1800 my daily ride and cross country runner

Prior bikes....
1972 Suzuki GT380 I had charge of it for a year in 1973 while my friend was deployed and learned to love street riding....
New CB450 K7 after my friend returned...
New CB750 K5 Planet Blue, demise by ex cousin in law at 9,000 miles...
New CB750 K6 Anteres Red, to replace the totaled K5, I sold this K6 at 45k in 1983, I had heavily modified it, many great memories on it and have missed it greatly.....
1983 GL1100A, 1999 GL1500 SE, 1999 GL1500A

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #101 on: September 14, 2023, 06:35:20 PM »
Motor is mostly in!
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #102 on: September 14, 2023, 06:37:53 PM »
Quote from: HondaMan on September 14, 2023, 04:59:25 PM
Beautiful finish on the engine!

Yes it is! Thanks to you Mark.
« Last Edit: September 14, 2023, 09:21:26 PM by SanDogDewey »
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #103 on: September 16, 2023, 07:58:53 PM »
Got a few more thinks hooked up today. Need to get a battery and some fuel line. Got a handful of nuts and bolts coming from Partzilla.
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Breather Hoses
« Reply #104 on: October 12, 2023, 08:35:44 AM »
Read all the threads about breather hoses. Just want to verify for my K2. The cylinder head cover and top nipple on the oil tank are vented to the atmosphere. Were they originally T’d together? What is the best way to route them? The bottom nipple on the oil tank (overflow?) is connected to the rear nipple on the crankcase.

Has anyone found suitable hoses at NAPA? I fitted a hose between the oil tank and crankcase, but need to find something that fits the cylinder head cover and top oil tank vent (~12mm). Also looking for fuel lines (5.5mm) and overflow lines (3.5mm) today.
« Last Edit: October 12, 2023, 08:40:53 AM by SanDogDewey »
Logged

Online denward17

  • Expert
  • ****
  • Posts: 1,390
Re: Dewey’s CB750 K2
« Reply #105 on: October 12, 2023, 09:18:14 AM »
Thread drift/ Is that valve cover polished or painted?

Looks great !
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #106 on: October 12, 2023, 09:24:41 AM »
Quote from: denward17 on October 12, 2023, 09:18:14 AM
Thread drift/ Is that valve cover polished or painted?

Looks great !

Thank you! The valve cover is polished and clear coated.
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #107 on: October 13, 2023, 03:10:14 PM »
Got the rest of the engine hardware installed.
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Replacement VIN Plate
« Reply #108 on: October 15, 2023, 02:29:50 PM »
The PO had the frame powder coated and the VIN tag was missing. I ordered a replacement and got it installed today. The rivets are about 1.8mm wide. A 1/16" drill bit is about 1.5, so it worked well. I formed the tag around a piece of pipe to get a curve in it. Recommend drilling the first hole and installing the rivet, then drill the second hole and install the second rivet.
Logged

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,919
  • 1969 cb750
Re: Dewey’s CB750 K2
« Reply #109 on: October 15, 2023, 02:37:02 PM »
Super nice finishing touches! Nice attention to the details. I always feel those are the ones that complete the job. Well done.
Logged

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,840
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Dewey’s CB750 K2
« Reply #110 on: October 15, 2023, 02:43:29 PM »
Quote from: SanDogDewey on October 12, 2023, 08:35:44 AM
Read all the threads about breather hoses. Just want to verify for my K2. The cylinder head cover and top nipple on the oil tank are vented to the atmosphere. Were they originally T’d together? What is the best way to route them? The bottom nipple on the oil tank (overflow?) is connected to the rear nipple on the crankcase.

Has anyone found suitable hoses at NAPA? I fitted a hose between the oil tank and crankcase, but need to find something that fits the cylinder head cover and top oil tank vent (~12mm). Also looking for fuel lines (5.5mm) and overflow lines (3.5mm) today.

Yep, that's just how mine looks. ;)
I get fuel line from Honda as it fits right and lasts long. However, for the fuel line there is a polyethylene type (I think from Motion Pro?) that is hard to get, but makes better fuel line if you have to remove/reinstall the tank very often.
« Last Edit: October 16, 2023, 07:04:49 PM by HondaMan »
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,366
  • SOHC4 member # 2605
Re: Dewey’s CB750 K2
« Reply #111 on: October 16, 2023, 01:32:19 AM »
Tygon? Like used on weed eaters and chain saws?
Tygon gets stiff due to UV if I recall correctly.
Logged
David- back in the desert SW!

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #112 on: October 16, 2023, 08:47:25 AM »
Quote from: HondaMan on October 15, 2023, 02:43:29 PM
I get fuel mine from Honda as it fits right and lasts long. However, for the fuel line there is a polyethylene type (I think from Motion Pro?) that is hard to get, but makes better fuel line if you have to remove/reinstall the tank very often.

I ordered fuel line and overflow lines from Honda. Thank you!
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Fuel Line Routing
« Reply #113 on: October 16, 2023, 06:41:53 PM »
Fuel lines and clamp rings showed up today. Got them routed and installed.
« Last Edit: October 16, 2023, 07:00:59 PM by SanDogDewey »
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Gas Tank Decal
« Reply #114 on: October 16, 2023, 06:45:15 PM »
I wanted to make sure I "Preserve Nature", so I put this decal back on.

« Last Edit: October 16, 2023, 06:51:45 PM by SanDogDewey »
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Hondaman Ignition
« Reply #115 on: October 16, 2023, 06:49:36 PM »
Also working to reinstall the Hondaman transitorized Ignition! S/N 098!
« Last Edit: October 16, 2023, 06:52:08 PM by SanDogDewey »
Logged

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,840
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Dewey’s CB750 K2
« Reply #116 on: October 16, 2023, 07:06:14 PM »
Quote from: SanDogDewey on October 16, 2023, 06:49:36 PM
S/N 098!

Wow! That was a LONG time ago!
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Tool Kit
« Reply #117 on: October 25, 2023, 12:32:14 PM »
Not sure what constitutes a full tool kit, but this is what was in the bike. I know I'm missing the screwdriver handle.
« Last Edit: October 25, 2023, 12:34:03 PM by SanDogDewey »
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Muffler Protector
« Reply #118 on: October 25, 2023, 12:33:29 PM »
Replacing the last of the hex head screws with the correct hardware.
« Last Edit: October 25, 2023, 12:38:21 PM by SanDogDewey »
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - Owner's Manual
« Reply #119 on: October 25, 2023, 12:40:16 PM »
Surprised that an original owner's manual is still under the seat!
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #120 on: October 25, 2023, 05:44:26 PM »
First start today! Still need to sync carbs and sort out a few small items, but she is lookin' good!
Logged

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2
« Reply #121 on: October 25, 2023, 05:45:54 PM »
More pics...
Logged

Online newday777

  • Really Old Timer ...
  • *******
  • Posts: 5,256
  • Avatar is my 76 K6 in Colorado w/Cody on back 1980
Re: Dewey’s CB750 K2
« Reply #122 on: October 25, 2023, 05:47:14 PM »
It is looking good 👍
Logged
Stu
Honda Parts manager in the mid 1970s Nashua Honda
My current rides
1975 K5 Planet Blue my summer ride, it was a friend's bike I worked with at the Honda shop in 76, lots of fun to be on it again
1976 K6 Anteres Red rebuilding project, was originally my brother's that I set up from the crate, it'll breath again soon!
Project 750s, 2 K4, 2 K6, 1 K8
2008 GL1800 my daily ride and cross country runner

Prior bikes....
1972 Suzuki GT380 I had charge of it for a year in 1973 while my friend was deployed and learned to love street riding....
New CB450 K7 after my friend returned...
New CB750 K5 Planet Blue, demise by ex cousin in law at 9,000 miles...
New CB750 K6 Anteres Red, to replace the totaled K5, I sold this K6 at 45k in 1983, I had heavily modified it, many great memories on it and have missed it greatly.....
1983 GL1100A, 1999 GL1500 SE, 1999 GL1500A

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Dewey’s CB750 K2
« Reply #123 on: October 25, 2023, 06:19:46 PM »
Gorgeous.
Looking for a second to my nomination for BOTM:  http://forums.sohc4.net/index.php/topic,180400.0.html
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline SanDogDewey

  • Hot Shot
  • ***
  • Posts: 274
Re: Dewey’s CB750 K2 - First Start
« Reply #124 on: October 25, 2023, 06:35:53 PM »
Logged
Pages: 1 ... 3 4 [5] 6   Go Up
« previous next »