« previous next »
Pages: [1]   Go Down

Author Topic: Chips in tank paint  (Read 529 times)

0 Members and 1 Guest are viewing this topic.

Offline stevenmac

  • Full Member
  • *
  • Posts: 49
Chips in tank paint
« on: February 18, 2022, 10:54:41 AM »
I had a recent mishap with my gas tank, and now have two tiny chips in the paint. Looking for advice on how to touch up that paint so the bare metal doesn't rust.

Here's what happened. The tank on my bike is one that I purchased NOS (an incredible find), so it has nearly perfect original paint, in Candy Bacchus Olive. That is, until I was at a gas station filling up, and this drugged-out guy who thought I was trying to steal his gas yanked the hose from behind me. He also threatened to light me on fire. But what bums me out the most is that the nozzle made two little chips in the paint. I live in a damp place, so the bare metal will rust immediately. Any thoughts on how best to remedy this without much impact on the rest of the original paint?

BTW, I was pretty stressed/angry on the drive home. Looked down at one point and saw the speedometer at 110.
Logged
1973 CB750

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Chips in tank paint
« Reply #1 on: February 18, 2022, 11:15:24 AM »
You can buy very close matching paint from vmrpaints.com. Apply with a syringe, seriously, to fill the hole in the paint until it’s level to the surface. May not even show soon enough.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,127
  • CB500 Number 1000036
Re: Chips in tank paint
« Reply #2 on: February 18, 2022, 11:57:47 AM »
Dont fill the chip with colour, just enough to colour the holethen fill with laquer from a touch up. Polish flat with3,000 grade wet and dry using warm soapy water then polish
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 10,249
  • 1969 cb750
Re: Chips in tank paint
« Reply #3 on: February 18, 2022, 12:49:20 PM »
Visit a cosmetics counter. They have nail polish in virtually every colour and shade! Pick one that is close. Use a tooth pick to fill the chip with the stuff and follow the instructions above. It dries to the touch in a few minutes, but leave it 24 hrs. before smoothing.
Logged

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: Chips in tank paint
« Reply #4 on: February 18, 2022, 01:16:47 PM »
Testors model kit brush paint might be a cheap option also. Might be able to buy a couple of colors to mix to get it close.
Logged

Offline Tracksnblades1

  • My Son was a collegiate competition Trap, Skeet, and sporting Clay
  • Master
  • *****
  • Posts: 1,912
Re: Chips in tank paint
« Reply #5 on: February 18, 2022, 02:35:23 PM »
If you are using acrylic enamel
Or acrylic polyurethane, you could use color,
very little reducer, hardener, wait until it’s a
a pudding consistency apply and leave high.
Let dry. Let dry. Let dry thoroughly. Lightly sand
high repair with wet fine sandpaper and buff to
desired shine..

I now a guy that can do this just by spreading the
Paint over the chip lists a wiper type of rubber not requiring any sanding.

It’s not me.
Logged
Age Quod Agis
Pages: [1]   Go Up
« previous next »