« previous next »
Pages: [1]   Go Down

Author Topic: Caswell tank sealer advice  (Read 921 times)

0 Members and 1 Guest are viewing this topic.

Offline Infest1382

  • Full Member
  • *
  • Posts: 16
  • Enjoy every sandwich
Caswell tank sealer advice
« on: April 24, 2022, 10:01:53 AM »
Hello,

So I used caswell epoxy tank sealer on my k2 tank, and after looking in my tank I seem to have some spots that are very thinly coated with the sealer but most is a very thick coat. From those of you who have experience with this product, could this be an issue? Thanks!
Logged
1972 CB750
1973 CB750
1977 CB750 Super Sport

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,910
  • Saver of unloved motorcycles.
Re: Caswell tank sealer advice
« Reply #1 on: April 24, 2022, 11:01:11 AM »
 I thinned mine according to the instructions. It seemed very thick and difficult to spread. As long as the coating is continuous it should be OK. I don't think there is a lot you can do about it now anyway.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Caswell tank sealer advice
« Reply #2 on: April 25, 2022, 08:50:49 AM »
It should be fine as long as you did not create any impediment of flow to the petcock. 
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline britman

  • Hot Shot
  • ***
  • Posts: 570
Re: Caswell tank sealer advice
« Reply #3 on: April 26, 2022, 07:27:58 AM »
I have used Caswell numerous times in the past.  The thick spots do not hurt anything, it will happen when you first use the product.  After a couple of uses, you become more familiar with how the product spreads or if you need to thin it due to temperature.  In my humble opinion it is by far the most durable product out there, I will not use anything else and I have tried most of them on the market......
Logged

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,920
  • 1969 cb750
Re: Caswell tank sealer advice
« Reply #4 on: April 26, 2022, 09:45:42 AM »
Quote from: SOHC4 Cafe Racer Fan on April 25, 2022, 08:50:49 AM
It should be fine as long as you did not create any impediment of flow to the petcock.

Totally agree, you are fine.
Logged
Pages: [1]   Go Up
« previous next »