Topic: Dynatek with no spark

[grumburg]

Went to take the CB750 for a ride today and would not start. Dynatek ignition and coils. Had not been ridden for a week. Pulled the plugs and no spark. When I first tried to start it, the kill switch was off. Turned it on and got one pop. Any ideas?

[Jerry Rxman Griffin aka MuthaF'er]

Check the wiring connection from the pickup

[grumburg]

CHECKED IT TWICE. That was it!! Third time was the charm. Thanks!!

[PeWe]

Verify the wires so they have no contact with the rotor.
Wire insulation will quickly grind off when in contact with rotor.
I had to use a strap to keep the wires away from the rotating part.