Has anyone got any info on fitting the parking brake spring i have tried everything but cant see how to tension it seems to hook on to the plate the cable attaches to then into a hole in the housing Update to any one who is interested you have to take the whole thing out of the housing its held in with 2 screws both very tight you may need an impact driver to remove them remove the circlip and take of the ratchet and pawl retainer the whole thing will be full of crap clean it out if you have a new spring or reinstall the old one you need to hook it onto the pawl retainer and wind it round to the hole in the back plate I cant find any info on this anywhere
