Topic: Who's got the best price on a K&N pcv filter ?

[grcamna2]

I want to install a small K&N pcv filter to vent my crankcase and found the right one;I just can't seem to find one that'll ship-out to me And meet my budget for the rest of the month..  A local Napa guy found it for me for $22.49 but then let me down because he wanted alot to have it shipped to his store here.
The small k&n filter is part#62-1000 and it's exactly the correct spec.(1.5" diameter)with the 3/8" male inlet to hook-up directly to the crankcase hose I'm using and just the right size to fit behind the sidecover.

update:I just called a local Carquest store(one of the few remaining Carquest,not Advance)in Woodland and they have the K&N in their system for $25+tax and no shipping,which is a good option for me.

[Kelly E]

That's great. We still have a real Carquest too. Advance built a store close to the existing Carquest so Keith moved to what turned out to be a better location and took all of the commercial customers with him. I feel very lucky to still have a real parts store in town. Plus Keith is a real auto parts counterman that knows what he is doing.

[Medyo Bastos]

How about jeff bezos?


Sent from my iPhone using Tapatalk

[Scott S]

 Cheapest one on ebay: 

https://www.ebay.com/itm/234664044860?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Cx7XVEL_TO6&sssrc=2349624&ssuid=Rw4Pl01JTi2&var=&widget_ver=artemis&media=COPY

[grcamna2]

I appreciate the feedback guys. 

[BenelliSEI]

That K&N Filter is a very attractive solution. For many years, we mostly used disposable, plastic case fuel filters on the race cars, as breather end caps. They were very economical and light weight......

[grcamna2]

That K&N Filter is a very attractive solution. For many years, we mostly used disposable, plastic case fuel filters on the race cars, as breather end caps. They were very economical and light weight......

I see the dimensions are only 1.5"? diameter and it's a molded rubber top(less damage to paint or plastic sidecover)so it's going to make it easier to place it on my bike,even after running a PCV hose along a frame rail with zip ties and placing it near the airbox behind a sidecover.

[PeWe]

I have this for my carbs pilot air jet filtering. 
Filter used for air coming in, not going out.

Really small. Got a good price at my local shop when finding it on their stock shelves.
https://www.knfilters.com/62-1560-vent-air-filter-breather
OD 35mm
Height 31mm, with spigot 42.5mm

The inlet is 19mm (3/4")
Maybe too wide to fit direct on breather pipe without additional hose to make it thicker. From 1/2" to 3/4"

[grcamna2]

I have this for my carbs pilot air jet filtering. 
Filter used for air coming in, not going out.

Really small. Got a good price at my local shop when finding it on their stock shelves.
https://www.knfilters.com/62-1560-vent-air-filter-breather
OD 35mm
Height 31mm, with spigot 42.5mm

The inlet is 19mm (3/4")
Maybe too wide to fit direct on breather pipe without additional hose to make it thicker. From 1/2" to 3/4"

Per,according to the K&N site the connector is 3/8" O.D.,not 3/4".

[PeWe]

I have this for my carbs pilot air jet filtering. 
Filter used for air coming in, not going out.

Really small. Got a good price at my local shop when finding it on their stock shelves.
https://www.knfilters.com/62-1560-vent-air-filter-breather
OD 35mm
Height 31mm, with spigot 42.5mm

The inlet is 19mm (3/4")
Maybe too wide to fit direct on breather pipe without additional hose to make it thicker. From 1/2" to 3/4"

Per,according to the K&N site the connector is 3/8" O.D.,not 3/4".

3/4" it is in that link:
"The 62-1560 crankcase vent filter has a K&N black rubber top and rubber base. The filter is 1-1/8 inches tall, 1-3/8 inches in outside diameter with a 3/4 inch flange which is designed to clamp directly on to metal or plastic tubing."

[grcamna2]

I have this for my carbs pilot air jet filtering. 
Filter used for air coming in, not going out.

Really small. Got a good price at my local shop when finding it on their stock shelves.
https://www.knfilters.com/62-1560-vent-air-filter-breather
OD 35mm
Height 31mm, with spigot 42.5mm

The inlet is 19mm (3/4")
Maybe too wide to fit direct on breather pipe without additional hose to make it thicker. From 1/2" to 3/4"

Per,according to the K&N site the connector is 3/8" O.D.,not 3/4".

3/4" it is in that link:
"The 62-1560 crankcase vent filter has a K&N black rubber top and rubber base. The filter is 1-1/8 inches tall, 1-3/8 inches in outside diameter with a 3/4 inch flange which is designed to clamp directly on to metal or plastic tubing."

Ok,I see now. The 62-1560 K&N filter is designed to fit over a piece of tubing with a hose clamp?
The 62-1000 that I'm interested in has a 3/8" metal pipe on it's steel flange which gets pushed into a piece of 3/8" PCV hose and clamped. 

[Scott S]

 Just go to Lowe's and get a barbed nipple that fits the hose. Then order cheap breathers on Ebay. You can probably get a bag full for ehat the K&N costs.

[PeWe]

K&N filters have increased in price.
I bought pods for my Smoothbores 29 2013,  my TMR32 2015.
It's around double price today, still in USD.

[grcamna2]

K&N has been around for a while;they have quality stuff that lasts.
I will run one of their breather filters knowing it can be cleaned and reused many times w/o falling apart;those cheap K&N replica filters are fair quality and useful.
I won't install a K&N as an air intake filter because I prefer the UNI foam filters.

[grcamna2]

Cheapest one on ebay: 

https://www.ebay.com/itm/234664044860?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Cx7XVEL_TO6&sssrc=2349624&ssuid=Rw4Pl01JTi2&var=&widget_ver=artemis&media=COPY

Scott,I appreciate you finding this for me 

[Stev-o]

How about jeff bezos?

Does he have one under the bed?!

[Don R]

 It comes with K&N oil, I'd think it would oil itself. 
 I bought a bike with the oil tank tied into the valve cover vent once. I cut in a tee and used one of those to vent them both under the gas tank.