« previous next »
Pages: [1]   Go Down

Author Topic: Bearing retainer tool - CB750  (Read 1392 times)

0 Members and 1 Guest are viewing this topic.

Offline boaf

  • Full Member
  • *
  • Posts: 62
Bearing retainer tool - CB750
« on: November 27, 2022, 11:26:53 AM »
I’ve googled many terms and can’t seem find a tool for the rear wheel bearing retainer on the 750.

It’s the larger of 2 retainers, part 41231-283-000.

Does Motion Pro make a tool for this?

Thanks!
Logged
Build Thread '78 CB550K Four 'Phoenix' - http://forums.sohc4.net/index.php/topic,171255.0.html

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 16,500
  • Bike almost back to the 70's 2015
Re: Bearing retainer tool - CB750
« Reply #1 on: November 27, 2022, 11:36:41 AM »
Check this seller that sell the tools for both hubs + clutch.
Paper copy of CB750 shop manual too.
I have one, in my living room, far away from oil ;)

https://www.ebay.com/itm/254652243320?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8uuBLBV_Q4y&sssrc=2349624&ssuid=XgCEg0CPSya&var=&widget_ver=artemis&media=COPY
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline boaf

  • Full Member
  • *
  • Posts: 62
Re: Bearing retainer tool - CB750
« Reply #2 on: November 27, 2022, 12:43:05 PM »
Thanks! I’ll check that out. 

However I really only need to one tool as I already have the a clutch tool and tool for smaller retainer.

I’m not actually working on a 750 just have a rear hub I’m using on a different project.

And yes I definitely also have paper manuals that don’t go to the work shop.  If I need a reference while working there I just print the relevant pages ;)
Logged
Build Thread '78 CB550K Four 'Phoenix' - http://forums.sohc4.net/index.php/topic,171255.0.html

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,152
  • Sunny Central Florida
Re: Bearing retainer tool - CB750
« Reply #3 on: November 27, 2022, 12:59:34 PM »
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 15,003
  • CB500 Number 1000036
Re: Bearing retainer tool - CB750
« Reply #4 on: November 27, 2022, 06:42:00 PM »
Go to that seller in UK own website, he sells cheaper and individual, als does stainless caliper pistons, i buy regularly from him.
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,665
Re: Bearing retainer tool - CB750
« Reply #5 on: November 27, 2022, 07:29:54 PM »
You might not need a tool to remove the bearing retainer if you drill out the staking deep enough.
Last one I did was on a drill press and it's very easy to tell when you've drilled completely through the threads. After removing all of the chips my retainer unscrewed with only finger pressure.
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 15,040
  • Bought her new 4/75
Re: Bearing retainer tool - CB750
« Reply #6 on: November 27, 2022, 08:23:59 PM »
I made mine using a simple aluminum bar from Home Depot. I drilled the 2 holes and inserted a bolt with an OD almost the ID of the holes in the retainer through each hole with one end of the bolt protruding out with a nut on each side of each bolt leaving bar at both ends to leverage.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline boaf

  • Full Member
  • *
  • Posts: 62
Re: Bearing retainer tool - CB750
« Reply #7 on: November 28, 2022, 04:44:01 AM »
Done!

Quote from: bryanj on November 27, 2022, 06:42:00 PM
Go to that seller in UK own website, he sells cheaper and individual, als does stainless caliper pistons, i buy regularly from him.
Logged
Build Thread '78 CB550K Four 'Phoenix' - http://forums.sohc4.net/index.php/topic,171255.0.html

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,600
Re: Bearing retainer tool - CB750
« Reply #8 on: November 28, 2022, 11:56:11 AM »
There's nothing special about Honda's "special" tool. You can make one yourself.
« Last Edit: November 28, 2022, 01:26:06 PM by Deltarider »
Logged
CB500K2-ED Excel black
"There's enough for everyone's need, not enough for anyone's greed." Mahatma Ghandi

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,840
  • Northern Virginia
Re: Bearing retainer tool - CB750
« Reply #9 on: December 03, 2022, 04:48:44 AM »
Old wrench from angle grinder.  Drill holes where you need them and insert spring pins. 
Logged
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline stocky

  • Full Member
  • *
  • Posts: 91
Re: Bearing retainer tool - CB750
« Reply #10 on: December 03, 2022, 10:26:45 PM »
Stand on the center to keep in place and hammer the ends to back the retainer out.
Logged
Pages: [1]   Go Up
« previous next »