Topic: Does this look like the exhaust gasket is still on there?

[denward17]

Looking at the pics, does that look like the exhaust gaskets are stuck on the head exhaust ports?

I tried using a pick tool to see if they would come loose, no luck.

Before I resort to harsher techniques, wanted to check to make sure that these are the old gaskets.  I assume they have never been out.  The stock rusted exhaust was still on the bike when I purchased.

[Tim2005]

yes, it's the reddish-coloured thing

[Don R]

 Yup. go for it.

[Stev-o]

yes, it's the reddish-coloured thing

+1.  I typically use a small screwdriver and a hammer, a light tap should separate it.

[denward17]

Good to know, Thanks Guys..

[RAFster122s]

It is made of copper and the head is aluminum, so gentle tap, don’t wanna score or scar the exhaust port sealing surface.

[Shtonecb500]

use a razor blade to get it started if need be so you arent gouging with a screw driver.

[PeWe]

Very small, thin screwdriver to get inside the gasket and lift it a little.
Then use a bigger one and get the gasket out.

[denward17]

Got them this morning, using a small screw driver, Thanks for the tips.

[PeWe]

It is possible that the gasket is not that visible.
Adding a new one on top and the exhaust might get a strange fitting.