Topic: Get a color print of the wiring diagram to ease use

[twright3]

I have an original owners manual for my K1 but the wiring diagram is difficult to use. It's easily damaged and the lines are very close together. I found a wiring diagram on the internet (or I could have scanned it from the manual) and had an 11x17 print made. Now it's easier to follow the lines and I don't care much if it get damaged. I decided to do this for several vehicles at once so I used an online service. This is impractical for one image because the postage is brutal. I did notice when checking the options that FedEx has print centers that will make large color prints for about $3 per square foot, so an 11x17 would be about $5. It may be possible to do better at Office Depot or Staples. Use card stock.
See attached picture; the pen is for scale although I may use it to make notes on the diagram.

[Don R]

 I was able to print old man Honda diagrams on two pages and tape them together. 

[spotty]

i've downloaded a few wiring diagrams from the net onto a usb stick, taken them to the local office supplies store, had them printed in A3 format ( same size as twright3 mentions below )and laminated, cost about $12 each. one was for the R3 which needed elec work doing and my auto elec was high in his praise of this action as he's getting old and found it a hell of a lot easier to follow the wiring in big colour

[Don R]

 I saw a guy that was putting an efi engine into a 32 Dodge Brothers coupe, way back when it was an unknown deal and pretty primitive. He had the engine wiring diagram blown up at a blueprint maker shop, it covered an entire table.

[newday777]

I saw a guy that was putting an efi engine into a 32 Dodge Brothers coupe, way back when it was an unknown deal and pretty primitive. He had the engine wiring diagram blown up at a blueprint maker shop, it covered an entire table.

Don
Was it in blue print or actual color?

🤔 That has me wondering if it could be done at a sign shop that has large plotter printers??? I'll have to swing by my friend's shop and ask.....

[tctreppin]

I have an original owners manual for my K1 but the wiring diagram is difficult to use. It's easily damaged and the lines are very close together. I found a wiring diagram on the internet (or I could have scanned it from the manual) and had an 11x17 print made. Now it's easier to follow the lines and I don't care much if it get damaged. I decided to do this for several vehicles at once so I used an online service. This is impractical for one image because the postage is brutal. I did notice when checking the options that FedEx has print centers that will make large color prints for about $3 per square foot, so an 11x17 would be about $5. It may be possible to do better at Office Depot or Staples. Use card stock.
See attached picture; the pen is for scale although I may use it to make notes on the diagram.

Looks my schematic I bought from Kojaykat in the uk


Sent from my iPhone using Tapatalk

[tctreppin]

My Kojay kat copy costs a bit , I’m going to try this . Never thought about going to office max.Not the deepest thinker, BUT. I’m a good dancer so it all equals out


Sent from my iPhone using Tapatalk