Not a good day today. I started to bolt the front end back up and hit a major issue when trying to set the front wheel. It would not fit in the fork bottoms, the axle set up was too wide. I checked and re-checked the wheel assembly and it was spot on. I ended up pulling the forks back out and the worst case scenario was true when you put a level on them, they are wrapped. When I brought the bike home someone had lowered the front end by sliding the triple tree down the tubes and this may have contributed to the issue, but who knows. Of course I did not check them when they were out for the overall. A new set of tubes are on order, probably a good thing, I need a break from the heat. The garage today was an inferno with extremely high humidity and I am wiped out. Yes I did curse a little, it seemed to help......
