Topic: CB500, 73, carb rebuild kit

[gary p.]

I took a chance, more on a whim, and ordered a kit from Walmart (where knew?).  The kits included brass, orings and a gasket.  The brass was rough.  Nothing was marked. The needle had a burr at the tip. The holes in the jets were ragged around the edges. (See photo). No idea if the rings were the correct size.  I’m taking it back for credit.
Where are y’all buying proper rebuild parts for the carbs?

[calj737]

Lesson learned.

Order from here-
https://www.jetsrus.com/a_jet_kit_street/honda_500_CB500K_1971-1973.htm

[Stev-o]

Confirm what brass parts you have, if OEM, most times they can be cleaned and reused.

As you just learned, aftermarket kits are worthless. 

[bryanj]

If you want O ring kits ask Nurse Julie a member, she can supply in ethanol proof viton

[Deltarider]

I took a chance, more on a whim, and ordered a kit from Walmart (where knew?).  The kits included brass, orings and a gasket.  The brass was rough.  Nothing was marked. The needle had a burr at the tip. The holes in the jets were ragged around the edges. (See photo). No idea if the rings were the correct size.  I’m taking it back for credit.
Where are y’all buying proper rebuild parts for the carbs?

I can't believe the junk they sell overthere... I had to rub my eyes... really... I can't believe it!