« previous next »
Pages: [1]   Go Down

Author Topic: CB550 stator harness question  (Read 559 times)

0 Members and 1 Guest are viewing this topic.

Offline 88BuckMeister

  • Enthusiast
  • **
  • Posts: 124
CB550 stator harness question
« on: August 04, 2024, 01:25:37 PM »
I installed the electronic ignition on my 1975 CB550. I spliced it into the key on wire on the rear brake harness. I'm trying to figure out how (and where) to run thr wire harness from the stator cover to the plug. Anyone have any pics? Also, those little bendy clips that mount behind the engine cover bolts, anyone have a part number on those? Thanks again!
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: CB550 stator harness question
« Reply #1 on: August 04, 2024, 01:53:13 PM »
The stator harness runs behind the shift cover. Look on the motor above the sprocket, there should be a plastic coated clip you tuck the harness into, then route the harness out the topside rectangular cutout. From there it runs up behind the left side body panel where the stock electrics are.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis
Pages: [1]   Go Up
« previous next »