« previous next »
Pages: [1]   Go Down

Author Topic: 76' 550 leak, from wear????  (Read 1150 times)

0 Members and 1 Guest are viewing this topic.

Offline jjc

  • Full Member
  • *
  • Posts: 60
  • How do I get this bike to go forward?
76' 550 leak, from wear????
« on: October 04, 2024, 01:24:20 PM »
HX -
Had weeping I figured was from head gasket being the little O'rings around the oil passages are a solid bet to leak after the engine sits.
Pull head and sealed all up with additional blk gasket sealer on t fry byhe valve cover with the O'ring gasket. All are new gaskets.
Well, I still have a leak from somewhere that shows up on lg side after a ride.
Just not sure from where. DON'T want to pull the head again.
Alternatives?    All O'rings & gaskets are new.
Logged
J.C. 
1976 550CB, 82' Honda 110T, 2000' Buell X3, 96' Yamaha 350XT, 16' Honda 450X, 2014 BMW R9T, 2003 BMW KGT,
2016 BMW 800GSA

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,011
  • CB500 Number 1000036
Re: 76' 550 leak, from wear????
« Reply #1 on: October 04, 2024, 01:38:04 PM »
Did you change the rubber pucks between cam cover and head plus the alloy sealing washers between the steel brackets for end caps and cam cover, either of those can leak
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: 76' 550 leak, from wear????
« Reply #2 on: October 04, 2024, 01:44:33 PM »
If you clean the motor up well, you can “dust it” with talcom powder then ride the bike. The source of the weep will promptly show up.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline jjc

  • Full Member
  • *
  • Posts: 60
  • How do I get this bike to go forward?
Re: 76' 550 leak, from wear????
« Reply #3 on: October 04, 2024, 03:23:58 PM »
[Did you change the rubber pucks between cam cover and head plus the alloy sealing washers between the steel brackets for end caps and cam cover, either of those can leak
[/quote] -
All new.
Logged
J.C. 
1976 550CB, 82' Honda 110T, 2000' Buell X3, 96' Yamaha 350XT, 16' Honda 450X, 2014 BMW R9T, 2003 BMW KGT,
2016 BMW 800GSA

Offline jjc

  • Full Member
  • *
  • Posts: 60
  • How do I get this bike to go forward?
Re: 76' 550 leak, from wear????
« Reply #4 on: October 04, 2024, 03:25:06 PM »
[If you clean the motor up well, you can “dust it” with talcom powder then ride the bike. The source of the weep will promptly show up.
[/quote]

Will try it
Logged
J.C. 
1976 550CB, 82' Honda 110T, 2000' Buell X3, 96' Yamaha 350XT, 16' Honda 450X, 2014 BMW R9T, 2003 BMW KGT,
2016 BMW 800GSA
Pages: [1]   Go Up
« previous next »