Topic: CB Guru's tool set question

[Don R]

 The K0 750 Honda tool kits came with 8-12, 10-14, and 17-19mm end wrenches. What does the 19mm fit?
  I notice I don't have 19mm in my K2 or K4 bike's tool sets and would prefer to learn online, not on the road.

[Ozzybud]

There should be something in the kit for the rear axle nut which is 26mm.

maybe you have a kit for a CT70. The rear axle nut on those is 19mm.(joking)

[Don R]

 I have the 26mm box end that takes the sleeve handle. I used to buy quite a few oem wrenches on ebay but the ko stuff is a little harder to find.

[Don R]

 There's a guy on marketplace near Kansas city that had a bunch of K0 and other Honda M/C tools, for $100 but will not ship. At least two double box end 26mm somebody nearby should go get it all.
 For those non-enlightened about K0, the wrenches are made different, there are 3 end wrenches with the ends different than later ones. and a big double box end with both boxes on the same end.

[jlh3rd]

The K0 750 Honda tool kits came with 8-12, 10-14, and 17-19mm end wrenches. What does the 19mm fit?
  I notice I don't have 19mm in my K2 or K4 bike's tool sets and would prefer to learn online, not on the road.

call this guy and ask him.

[andy750]

From BobsIndiansales2012

https://www.ebay.com/itm/256655223520

[carnivorous chicken]

Taking a stab at it, but isn't the "special washer" (on the 550F, 30233300000) under the points cover 19mm?

[Deltarider]

Taking a stab at it, but isn't the "special washer" (on the 550F, 30233300000) under the points cover 19mm?

No, that one is 23mm.

[jonda500]

Rear engine mount/footpegs nuts?
John

[Medyo Bastos]

Rear engine mount/footpegs nuts?
John

Yes, lower rear motor mount/ foot pegs


Sent from my iPhone using Tapatalk

[Don R]

 Cool, thanks. I'm a big fan of the newer crescent wrenches with the fat handle and the big "next size up" head. Maybe I'll squeeze one of those in there somehow.