« previous next »
Pages: [1]   Go Down

Author Topic: 70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?  (Read 182 times)

0 Members and 1 Guest are viewing this topic.

Offline slyguy

  • Enthusiast
  • **
  • Posts: 107
70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?
« on: November 05, 2024, 09:21:05 PM »
I can’t remember if any were chrome finish?
Logged

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,272
  • Old guy
Re: 70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?
« Reply #1 on: November 06, 2024, 06:44:41 AM »
Zinc as far as I know
Logged
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline slyguy

  • Enthusiast
  • **
  • Posts: 107
Re: 70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?
« Reply #2 on: November 06, 2024, 04:53:15 PM »
No one else chimed in…I‘ll probably do the zinc
Logged

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,820
Re: 70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?
« Reply #3 on: November 06, 2024, 06:45:29 PM »
Never had a k0, but have seen a few...I feel like I would have noticed chrome bolts in such a signif icant and conspicuous location.  No other model had chrome bolts there, just zinc plated.  For more authoritative info, could always check the CMS parts fiche, which generally has quite complete pictures and descriptions of most parts.  Maybe even the part number has a code specing plating type
Logged
If it works good, it looks good...

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,871
  • Saver of unloved motorcycles.
Re: 70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?
« Reply #4 on: November 13, 2024, 09:54:27 PM »
 Zinc on mine. Usually "8" heads.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,347
  • SOHC4 member # 2605
Re: 70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?
« Reply #5 on: November 14, 2024, 01:17:12 AM »
Zinc with clear chromate passivation
Logged
David- back in the desert SW!

Offline slyguy

  • Enthusiast
  • **
  • Posts: 107
Re: 70’ ko engine right side 8mm bolts for eng mount plates chrome or zinc?
« Reply #6 on: November 15, 2024, 06:32:45 AM »
I ended up doing clear zinc on all my hardware & Wow what a difference! Sure looks pretty:)
Logged
Pages: [1]   Go Up
« previous next »