Author Topic: oil leak in wrog place  (Read 99 times)

0 Members and 1 Guest are viewing this topic.

Offline pintofanatic1

  • Full Member
  • *
  • Posts: 1
oil leak in wrog place
« on: November 21, 2024, 07:04:44 AM »
Does the 550 have one peiece crank seals the reason i ask is because the alternator is coated in motor oil , or is there some kind of plug or cap on that side of the crankcase that would allow oil to seep into that space????

Offline denward17

  • Expert
  • ****
  • Posts: 1,384
Re: oil leak in wrog place
« Reply #1 on: November 21, 2024, 07:10:36 AM »
Welcome to the forum!

I don't think oil is suppose to be in there, looking at the diagram below, #23 is a seal...

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,010
  • CB500 Number 1000036
Re: oil leak in wrog place
« Reply #2 on: November 21, 2024, 08:59:44 AM »
There is a crank seal that needs cases split to change or an oil gallery plug held in by the cover where an O ring can leak, part 23 in picture. N.B. note the direction the plug sits ( pip out)
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,838
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: oil leak in wrog place
« Reply #3 on: November 21, 2024, 10:48:38 AM »
If yours is leaking at the little oil journal port (the O-ring BryanJ mentions) I have those.
Otherwise, you'll have to replace that one behind the alternator's rotor - for which you'll split the cases AND need the rotor puller. I've found it far easier to remove the rotor first, then split the cases to change the seal.
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com