Author Topic: Where are all you Kiwis  (Read 63775 times)

0 Members and 1 Guest are viewing this topic.

Offline Daggless888

  • Enthusiast
  • **
  • Posts: 239
Re: Where are all you Kiwis
« Reply #50 on: June 16, 2016, 09:07:43 PM »
Bike number 2 underway  :)

Offline Daggless888

  • Enthusiast
  • **
  • Posts: 239
Re: Where are all you Kiwis
« Reply #51 on: August 03, 2016, 05:55:02 AM »
Cognito moto replica just about complete. Only carbies to go then we fire it up  :)
« Last Edit: August 03, 2016, 05:57:00 AM by Daggless888 »

Offline Matt.h

  • Full Member
  • *
  • Posts: 7
Re: Where are all you Kiwis
« Reply #52 on: October 23, 2016, 12:39:44 PM »
Hi guys brand new to this and from Auckland .i have a cb350/4 and have been building a cb500/4 for a while.  Have found on my cb500 biuld that the frame I started with is bent . So was hoping someone on hear mite have a frame for sale .they don't come up on trade me that often

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Where are all you Kiwis
« Reply #53 on: October 26, 2016, 02:23:45 AM »
Hi guys brand new to this and from Auckland .i have a cb350/4 and have been building a cb500/4 for a while.  Have found on my cb500 biuld that the frame I started with is bent . So was hoping someone on hear mite have a frame for sale .they don't come up on trade me that often

How bent..?  Getting it straightened is always an option... ;)
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Matt.h

  • Full Member
  • *
  • Posts: 7
Re: Where are all you Kiwis
« Reply #54 on: October 26, 2016, 09:50:51 PM »
The frame has a curve in the back bone to the right and the fork angle is out to.
Since the frame no longer has a vin number in the system I didn't think ther was any point spending money to fix it . A new frame should be cheaper. The bike is a bit of mix  I tried to attach a photo but I don't think it has been approved yet haha. It's  a cb500 frame and motor , gsxr forks and brakes front and rear , Harley wheels ....

Offline Lindsay G

  • Full Member
  • *
  • Posts: 17
Re: Where are all you Kiwis
« Reply #55 on: October 30, 2016, 09:07:42 AM »
Hi guys, Marlborough here.I've got a CB750K1 that was last registered in 79 and was pulled to bits.I got it in about 90 but there was too much missing to do anything at the time,not to mention I was suffering from a bad case of poverty for a long time.But a couple of months ago I decided to dig through the sheds and see just what I had and then I realised that because it had been pulled to bits so early what was there was original.So I've been buying parts when the right ones come up.
Also doing up an XS650.

Offline jubamad

  • Full Member
  • *
  • Posts: 3
Re: Where are all you Kiwis
« Reply #56 on: October 30, 2016, 08:36:11 PM »
Hi all,

Just got my first CB750F 1982 this weekend. Bought off a guy in Woodville and rode back to Auckland on saturday. It was a really nice ride. Engine is in great shape! Really enjoyed.

This will be my 6 month project as I'm planing to renovate a bit, put new seat, handle bar, front/back lights etc etc.

I'm in Auckland and looking for a group to go for weekend rides. Let me know if any of you are in Auckland so we can meet up.

I'll be posting some pics later.

Cheers

Offline Kiwiphil

  • Full Member
  • *
  • Posts: 1
Re: Where are all you Kiwis
« Reply #57 on: September 25, 2017, 03:03:43 AM »
Hey Phil,this isPhil from Wgtn, I have just joined this site and have a c.b 750 hard tail chopper that was originally built in the 70's as a kit bike,and will be posting pictures soon,

Offline CBDean

  • Full Member
  • *
  • Posts: 1
Re: Where are all you Kiwis
« Reply #58 on: October 16, 2017, 11:39:12 PM »
Hi kiwis
Dean here just brought a 1976 CB400f
Can't wait for summer been 8 years since I've been for a ride on the road
Looking forward to some help with my bike as well
Thanks

Offline dubman59

  • Full Member
  • *
  • Posts: 12
Re: Where are all you Kiwis
« Reply #59 on: February 23, 2018, 11:30:38 PM »
Hi Phil.
In Christchurch. I have just bought a CB650

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: Where are all you Kiwis
« Reply #60 on: April 09, 2018, 02:21:54 AM »
Hi,

Just a quick question for Fishman Phil....

I read on a post, you painted your bike using CRC products a few years ago...  Just want to ask how it held up and would you recommend??

Also is there anything else that would be better?? (Budget Based)

I can't afford powder coating!!

Cheers

Rich
Hi Rich ... the CRC held up very well, but have just swapped the frames between the bikes which meant a complete strip down of both bikes, and went over everything. This time I used Supercheap Autos and purchased Duplicolour engine enamels and used that for all frame parts and the engine.
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline jaytee-nz

  • Hot Shot
  • ***
  • Posts: 645
Re: Where are all you Kiwis
« Reply #61 on: September 09, 2018, 06:02:52 PM »
Hi Phil
How's the CB400 getting on ? Haven't seen an update in the Projects section lately.
John

Offline KuangGradeMark11

  • Full Member
  • *
  • Posts: 13
Re: Where are all you Kiwis
« Reply #62 on: September 26, 2018, 06:02:40 PM »
Cognito moto replica just about complete. Only carbies to go then we fire it up  :)

I like that A LOT

Offline Vinu

  • Full Member
  • *
  • Posts: 1
Re: Where are all you Kiwis
« Reply #63 on: January 23, 2019, 09:47:27 PM »
Hi all,

I'm currently in search for my first SOHC/4, mainly after a CB550 or 350F. Hoping you guys may know where I can get my hands on one don't really mind the conditions of the bike, I'm looking into building a bit of a cafe/brat.

Cheers,
Vinu   
« Last Edit: January 23, 2019, 09:51:09 PM by Vinu »

Offline rosewood

  • Enthusiast
  • **
  • Posts: 235
Re: Where are all you Kiwis
« Reply #64 on: January 24, 2019, 12:11:06 PM »
Hi Vinu,

Welcome to the forum, your best bet is to keep an eye out on trade me. I purchased my 550 from a friend just over 3 years ago. Back then you would see the odd 550 or 500 come up regularly on trademe but over the last 2 years fewer and fewer are being advertised and asking prices have gone up. I have noticed a few 350/4 lately though...

https://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-1911443275.htm?rsqid=079234477bda48ed8b1eb351e62def96


This one looks ideal...
https://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-1915307019.htm?rsqid=079234477bda48ed8b1eb351e62def96

350 twin..
https://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/listing-1919894512.htm?rsqid=079234477bda48ed8b1eb351e62def96

good luck with your search...try find one that has a live registration that runs at least otherwise you will more than likely be in for a complete rebuild which is costly. From my experience it is worth paying more for a running bike as the cost of rebuilding adds up very very quickly....If i could turn back the clock that's what I would do.

where are you located?

rosewood... 




Offline benlyboy

  • Full Member
  • *
  • Posts: 1
Re: Where are all you Kiwis
« Reply #65 on: August 08, 2019, 11:40:37 AM »
Hi Phil
I'm a kiwi now living in the US. brought my first restoration with me from NZ. Its a 61 c92 benly that I picked up at an action in Napier. I had no idea what it was, just liked the look of it. Now working on a 67 superhawk. 

Offline Steve The Kiwi

  • Full Member
  • *
  • Posts: 3
Re: Where are all you Kiwis
« Reply #66 on: August 16, 2024, 04:16:19 PM »
New here, live and work in Christchurch. Have a CB400/4 about to start rebuild.
Honda CB400/4
Kawasaki Z650F1
FIM Senior Technical Steward.
MNZ Technical Steward
MNZ National Grade Steward.