Topic: What did you do to your bike today ?

[WhyNot2]

aint done much to mine for years except ride and maintain,today the neutral light went funky,didnt glow when it was in neutral,then glowed when it was in first parking it and stalled as i dumped the clutch,then no light at all,no biggie,got home cracked a beer and dropped the left cover to dig out the switch and found its worn out,also testing the wire turns out the globe was a bit corroded in its holder,didnt have a spare earth switch so just soldered a chunk of brass shim will do for now,also found a stripped thread on the oil pump as i nipped them up,one thing led to another the 6mm helicoil i used wouldnt bite so just thought #$%* it go 8mm and all done,phew!

Good save........!!!!!

[Cevan]

Painted the engine.  Now I just have to put it back together.

[Ozzybud]

I finished freshening up the hubs and re-spoking the CB350F today. Most everything on this bike is super clean. The spokes were the worst part. Not much corrosion anywhere
 Except inside the tank which I'll be treating this week

 .

[Magpie]

Finished getting the CB1100F exhaust system ready to install.

[grcamna2]

Finished getting the CB1100F exhaust system ready to install.

Did you spray it ?
Looks good.

[Magpie]

Yes, VHT flat black header paint and a coat of VHT clear satin header paint. Cliff.

[dave500]

let us know how that vht paint holds up?few years ago i used that vht heat paint even with the special primer,it lasted bout 3 months before it peeled exposing the primer etc and wernt cheap all up,i sanded it back again and used cheap arse white knight brand pot belly stove black and its holding up well after years and years.

[MauiK3]

Looks great, yes, it will be interesting to see what happens when heated.

[grcamna2]

let us know how that vht paint holds up?few years ago i used that vht heat paint even with the special primer,it lasted bout 3 months before it peeled exposing the primer etc and wernt cheap all up,i sanded it back again and used cheap arse white knight brand pot belly stove black and its holding up well after years and years.

I've searched for Gloss 'Chrome'/Silver.. and Gloss Black heat paint for exhaust that will stay-put;I never found it.

[HondaMan]

I took an electric heater out to the garage to keep my old friend a little warmer: it hasn't been run in a month! I think it might be getting jealous of the 550 that's out there getting so much attention lately? 

[UAMedic2025]

Polished some pieces on the 65 s90 project I got recently . Struggling to find a rear mud guard and stay bracket though. If anyone has parts for these that they would like to see get used let me know . I just got home from 30 months in ukraine trying to decompress a bit . Trying to finish this project and get few rides in before I head back for few months more . Love the forum you all seem wonderful and filled with knowledge . Cheers from South Carolina

[RAFster122s]

Might be able to find a set looking on eBay international sites, the bikes lived on internationally for several years after they were no longer offered in the US and Canada. Indonesia and Thailand sellers sometimes have them.  I was lucky enough to ask a seller I was acquiring some other things from several years ago and he sourced me a good set of brackets and a lightly used rear mudflap. The S90 group might be a good place to ask for leads. They are formerly a Yahoo Group and now use io groups if memory serves me correctly.
Need shots from lower perspective to capture the bike from a better vantage to appreciate it more. A step and one half to the right and 2-2.5 foot (3/4M) lower angle would do nicely...

[newday777]

Polished some pieces on the 65 s90 project I got recently . Struggling to find a rear mud guard and stay bracket though. If anyone has parts for these that they would like to see get used let me know . I just got home from 30 months in ukraine trying to decompress a bit . Trying to finish this project and get few rides in before I head back for few months more . Love the forum you all seem wonderful and filled with knowledge . Cheers from South Carolina

Do you have pictures of the parts and part numbers 🤔

[grcamna2]

Polished some pieces on the 65 s90 project I got recently . Struggling to find a rear mud guard and stay bracket though. If anyone has parts for these that they would like to see get used let me know . I just got home from 30 months in ukraine trying to decompress a bit . Trying to finish this project and get few rides in before I head back for few months more . Love the forum you all seem wonderful and filled with knowledge . Cheers from South Carolina

Welcome to the forum and thank You for your service.