« previous next »
Pages: [1]   Go Down

Author Topic: Frame Question  (Read 181 times)

0 Members and 1 Guest are viewing this topic.

Offline steve

  • Full Member
  • *
  • Posts: 95
Frame Question
« on: January 26, 2025, 06:58:03 AM »
I am in the process of restoring a 1971 CB750.  The left frame where the foot peg mounts is slightly bent in toward the swing arm.  Here is my question:
1. Would anyone know what the measured distance would be between the rear foot peg mounts on the frame.

I would like to straighten to the correct dimensions.

Thanks in advance for any info.
Logged

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,393
  • Old guy
Re: Frame Question
« Reply #1 on: January 26, 2025, 07:07:08 AM »
A photo would help
Welcome!
Logged
1973 CB 750 K3
10/72 build Z1 Kawasaki

Online Oly

  • Full Member
  • *
  • Posts: 60
Re: Frame Question
« Reply #2 on: January 26, 2025, 07:51:47 AM »
I have a 1971 CB750 stripped down to the bare frame right now, so if you could post a picture of exactly where you want a measurement taken I can get that for you.
Logged
1971 CB750 K1
1967 BSA 441 Victor
1966 Yamaha 250cc YDS3c Big Bear Scrambler

Online Oly

  • Full Member
  • *
  • Posts: 60
Re: Frame Question
« Reply #3 on: January 26, 2025, 11:13:51 AM »
Steve... measuring the inside dimension between the rear foot peg mounts is 10.25".  Let me know if any other measurements would be helpful.
Logged
1971 CB750 K1
1967 BSA 441 Victor
1966 Yamaha 250cc YDS3c Big Bear Scrambler

Offline steve

  • Full Member
  • *
  • Posts: 95
Re: Frame Question
« Reply #4 on: January 26, 2025, 12:59:58 PM »
Thank you - 10.25 is it.  The left was bent .25"
Thanks again
Logged
Pages: [1]   Go Up
« previous next »