Author Topic: Does Yamiya sell Yoshi repro pipes? (Read 3791 times)

Rhonda750F · « **on:** March 22, 2007, 01:40:11 PM »

I was looking at the Japanese Yamiya web site and saw something interesting. Under the muffler section they have a 4 to 1 set called MO11. Does any one know if this is a Yoshimura replica? I sent them an inquiry to see if they had more pics of it, or pics of the system on a bike. Does any one know anything about this?

andy750 · « **Reply #1 on:** March 22, 2007, 02:19:42 PM »

No idea but I do know that Yamiya make the best stuff (or use the best stuff if they dont make it themselves - these guys are fanatical about CB750s). If you look at a previous post of mine about Nagoya, Japan you will see some photos of their shop when I went there in 2006.

Good luck,
Andy

AR-Guy · « **Reply #2 on:** March 22, 2007, 04:04:08 PM »

Ok I am trying to find that web site but all I am getting is web sites that make arrows...

Could you post the url for us illiterate folks....

Thanks

Bob Wessner · « **Reply #3 on:** March 22, 2007, 04:18:16 PM »

Quote from: AR-Guy on March 22, 2007, 04:04:08 PM

Ok I am trying to find that web site but all I am getting is web sites that make arrows...

Could you post the url for us illiterate folks....

Thanks

http://www.yamiya750.com/new%20parts%20english1.html

AR-Guy · « **Reply #4 on:** March 22, 2007, 04:37:21 PM »

Man I dig that site! Thanks....

Buck

736cc · « **Reply #5 on:** March 23, 2007, 04:26:54 AM »

I asked Yamiya a while ago if they are Yosh pipes.
Nope.
But its a nice-looking pipe all the same.

Rhonda750F · « **Reply #6 on:** March 23, 2007, 08:47:34 AM »

If I get something back from them, I'll post it here but It looks a reasonable deal. $350 for the pipes and around 200 for shipping. about $550 bucks for a set of pipes straight from the motherland.
The megaphone from my kerker system is beat and a new exhaust for the rebuild sounds really tempting!
I want to be the first kid on the block (maybe continent) to have one of these baby's

Andoo · « **Reply #7 on:** March 23, 2007, 11:34:31 AM »

I have a friend with the yoshi pipe, and this looks nothing like it.

Rhonda750F · « **Reply #8 on:** April 05, 2007, 11:47:44 AM »

The folks at Yamiya just sent me more pics of the pipes.

lrutt · « **Reply #9 on:** April 05, 2007, 12:45:16 PM »

downside looks to be you can't repack that muffler. Bummer.

kghost · « **Reply #10 on:** April 05, 2007, 12:48:08 PM »

Thats a gorgeous pipe.

Bodi · « **Reply #11 on:** April 05, 2007, 12:49:29 PM »

The picture of the outlet shows what could be a large circlip holding the baffle plate in, so maybe you can repack it.

mick750F · « **Reply #12 on:** April 05, 2007, 12:53:16 PM »

Sweet!!! A very nice looking set of pipes. I wonder what they sound like...

Mike

Ricky_Racer · « **Reply #13 on:** April 05, 2007, 03:44:41 PM »

Quote from: Andoo on March 23, 2007, 11:34:31 AM

I have a friend with the yoshi pipe, and this looks nothing like it.

Andoo is right. I have an original NOS Yoshi exhaust. The Yoshi has a removable tail pipe that begins at the end of the four-tube collector and has a bolt-secured baffle. The bends downstream of the collector are smooth, not angular welds and there is a rear supporting tab that bolts to the CB750 frame.

I was hoping that the Yamiya exhaust was an exact duplicate, because I've had difficulties finding anyone who would do a limited run of my exhaust design without a major setup charge. Looks like my search is on again.

Thanks for posting the pics, Rhonda. It just so happens that today I also got in a number of photos from Yamiya.

I do think, though, that this looks like a totally acceptable exhaust for the money. $400 USD delivered is cheap for a new well-made midweight exhaust that will perform strongly across the mid and upper rev range, unlike the heavy and beautiful, but anemic, Kerker. RR

Jim F · « **Reply #14 on:** April 05, 2007, 08:37:39 PM »

I to have an original Yosh exhaust but on my 78 GS 2 valve Suzuki (race version)
I was quoted about 1800.00 to have a copy of mine made
so it is very expensive (10 years ago too)

that Yamiya is a Sweet pipe though
and even if its not meant to be re-buildable
I am sure you can cut the end off and make it re-buildable

thanks for the web site

Jim

Jim F · « **Reply #15 on:** April 05, 2007, 08:49:33 PM »

A cleaned up pictrue of the business end
it does look like it can be re-built

Jerry Rxman Griffin aka MuthaF'er · « **Reply #16 on:** April 05, 2007, 10:29:50 PM »

I wanna see a picture of the chromed version and hear it also.

AR-Guy · « **Reply #17 on:** April 06, 2007, 04:04:33 PM »

Has anyone ordered from these folks before? If so what is your feed back on getting what you order and time in that arriving?

thanks,
Buck

Jinxracing · « **Reply #18 on:** April 06, 2007, 04:56:09 PM »

I'm interested in one of these too...maybe they'd give us a group rate if we bought a bunch of 'em.

AR-Guy · « **Reply #19 on:** April 06, 2007, 05:34:50 PM »

I would be in for a group deal....

Buck

yoomit · « **Reply #20 on:** April 06, 2007, 06:36:36 PM »

count me in too if you guys can rally a group together for a discounted buy.
i've been desperate for a yosh repro as well - this is damn close enough.
- M

andy750 · « **Reply #21 on:** April 07, 2007, 08:09:48 AM »

Yamiya are very good people and ship fast - my past experience 2 days from Japan. Ive been to the shop and chatted with them - they are the real deal. I wouldnt count on a group discount though -they have a big enough market in Japan. Who knows though, you could try.

cheers
Andy

yoomit · « **Reply #22 on:** April 07, 2007, 08:50:20 AM »

doesn't appear to be any mounting flanges around the muffler.
i wonder if these have to be custom-mounted - e.g., welded flanges?

Geeto67 · « **Reply #23 on:** April 07, 2007, 01:44:38 PM »

It looks a lot like the RC Engineering Pipe I have. Maybe not upswept as much but the RC pipe is a drag pipe and not a road race pipe (unless you jack up the rear an inch).

News:

Author Topic: Does Yamiya sell Yoshi repro pipes? (Read 3791 times)

AR-Guy

AR-Guy

Andoo

AR-Guy

AR-Guy