« previous next »
Pages: [1]   Go Down

Author Topic: Removing Fairing/Rewiring on 77CB550k  (Read 1264 times)

0 Members and 1 Guest are viewing this topic.

B. Alec

  • Guest
Removing Fairing/Rewiring on 77CB550k
« on: June 22, 2005, 09:43:31 AM »
Hey all, I've been looking for a Windjammer III manual or something to help me remove the damn thing from my new bike, to no avail. 

Does anyone know, assuming a stock wiring harness, how to:

A) Disconnect the wires going to the fairing properly. 

B) Re-connect them to the bike.

I'm assuming you just open up the flap on the left side of the fairing and disconnect the wires there, but is there any special trick to undoing the crimped connectors?  And when that's done, do all those wires connect to the rest of the bike's wiring in the headlight bucket? 

Thanks a lot! 
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,029
  • CB500 Number 1000036
Re: Removing Fairing/Rewiring on 77CB550k
« Reply #1 on: June 22, 2005, 09:58:40 AM »
Depends on model of 550. K1 & K2 inside headlamp K3 and some F in a plastic "box" under the tank.
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

B. Alec

  • Guest
Re: Removing Fairing/Rewiring on 77CB550k
« Reply #2 on: June 22, 2005, 10:46:40 AM »
Ok, thanks! 

So...is it just a matter of cutting the wires and soldering/crimping them back to the main harness, or should I be disconnecting the fairing some other way? 

Ben
Logged
Pages: [1]   Go Up
« previous next »