Topic: CB350F Tank Badge interchangeability

[Ozzybud]

I have been looking for some descent tank badges for my replacement tank for my CB350F. They were proving to be hard to find.
I was looking at my CL200 and the dimensions were identical. Looking at the schematic they had the same pin arrangement as the CB350F.
I found a set on ebay from a CB175 K6.i asked the seller for the dimensions and they were identical to the 350F including pin location. The contour was the only difference..
I assumed they were plastic. I was going to see if I could heat up (boil) and re contour to match the tank . I was pleased to find out when they arrived today that they are made from a very malleable pot metal.
They are all cast with the product code on the back.
So these will all work.i am sure there are many others
333=CB350F
342=CB175
378=CL200

 

[Flyin900]

Good tip and as you noted the interchangeability.

[Rayzerman]

Your source please!!  I got a plastic set and have to heat and re-contour slightly.  Originals were cast, I'd prefer that.  These plastic ones are fine, but I have to repaint the white to get the correct shade (their paint was thin and a bit yellowish).

[Ozzybud]

Used ones off ebay!  These are worth a look. They say NOS So they should be cast.

https://www.ebay.com/itm/266814480870?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sx3Pv9HMTMq&sssrc=4429486&ssuid=t3TSanHgRTi&var=&widget_ver=artemis&media=COPY