« previous next »
Pages: [1]   Go Down

Author Topic: oil pressure guage install  (Read 1219 times)

0 Members and 1 Guest are viewing this topic.

gold01ca

  • Guest
oil pressure guage install
« on: May 13, 2007, 07:35:29 AM »
so got me one of those slick drag specialties oil pressure guages off ebay. includes galley plug adapter and fiitings.
question:  do I need to use thread sealer or teflon tape or ? on any/all the threads?

thanks in advance!!
Logged

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: oil pressure guage install
« Reply #1 on: May 13, 2007, 07:46:34 AM »
I used Teflon tape when I installed mine. Just make sure you use the correct kind, for petro/chem environments. Don't use the kind for simple plumbing applications.
Logged
We'll all be someone else's PO some day.

Offline coyotecowboy

  • Hot Shot
  • ***
  • Posts: 406
  • Easily Distracted
    • American Legion Riders Post 69 Medicine Lodge, Ks
Re: oil pressure guage install
« Reply #2 on: May 13, 2007, 08:03:00 AM »
It might just be a matter of personal choice, but I usually use something like PTFE paste if it will be near engine components.  Gasoila brand works great, it never completely sets up but remains flexible to account for heating and cooling of the engine oil.  I'm just not a big fan of tape when it has the chance to come into contact with oil, tiny pieces can make into the system and I've seen it do verrrrrrry bad things to hydraulic pumps  :o

Just my .02 worth...
Logged
The adventure begins when things stop going as planned - Glen Heggstad

http://www.alrpost69.com/

Sunrise Orange 750 K2

1981 Husqvarna 430 XC, "Inga"
Pages: [1]   Go Up
« previous next »