Topic: What is the length of 71 cb750 k1 side stand?

[kgreb]

I really need to know!

TIA
kgreb

[Kevin D]

Hey kgreb, it's about 7 from the pivot bolt to the heel.

[kgreb]

Thanks a bunch, KevinD!

Does your stand hit the rubber stopper on the exhaust in the center or the edge. Mine just misses it. Which stopper (rectangle or circle) is used for the side stand?

I bought a used stand and it looks appropriate but it misses the stopper and i am wondering if I should keep looking for another stand.

kgreb

[Kevin D]

xtra busy right now but will follow with better info (photo?) later -  my 341 pipes are not OE but they have the same footprint as the 300's - the bumper is placed a little too short for the length of the stand and doesn't nearly hit on center - will post photo later after I clean it up - theres a rectangle bumper for the sidestand - check the partsfiches to see if placement is right.

http://members.tripod.com/cb750K2/parts-manuals/index.html

[kgreb]

I appreciate your help KevinD!

kgreb

[Kevin D]

Maybe these photos will be helpful:

[kgreb]

Again. Thanks KevinD. This helps. I think my stand must be slightly bent. I am going to measure it after I take it off and look at it again.

kgreb