CB750K5
I have just rebuilt the carbs and treated the tank with Por15.
Does Seaform damage Por15?
The bike is not in perfect condition (hesitates at idle etc.) It's got 45k miles on it and I don't know the history. I guess I should put Seaform into the crank case also..
NO - you should figure out what's wrong with the bike - have you done the tappets? Timing? Cleaned the carbs? Changed the oil? How long have you had the bike?
Aside from that, I can't imagine Seafoam harming the POR-15.
Thanks.
Good to know it won't damage POR-15.
Yes, I did change oil, tappets, timing, rebuilt carbs (new float valves, slow jets), new petcock, new fuel line (no inline filter and as short/straight as possible)
Now it idles okay around 1200 rpm but sometimes hesitates from idle and it stumbles(?) around 6000 rpm (lack of fuel?)
It has (old) Kerker 4 into 1 and pods.
Maybe I need carb tuning.. (115 main, needle at the middle slot, ATM).
I bought it from eBay. I think PO got it from PPO but he doesn't give me any history. It got 45K miles on it and by judging from the general state of the bike (front fork oil seal leaked and there was water in the tank), maybe the engine saw better days. I didn't open up the engine because it wasn't smoking.
I should go through plug chops but a bit lazy so looking for this miracle cure...