Topic: petcock part number

[pyro139]

need new petcock on a 81 cb650c any one know the part number for the petcock with the built in inlinefilter?
canuck i know you recently ordered one from honda?

[snyquist53]

16950-425-015

this is the # for the whole petcock assembly.  but the microfiche is showing to different types


this is the # for 3  the other doesn't have a part number labeled.   seems kinda wierd

[pyro139]

number3 is what my old one was, number 4 one i looking for, i know canuck with same bike recently baught a number 4 from honda.

[snyquist53]

sorry there is no number posted,  would that petcock be on any other bikes?  i can check that way

[pyro139]

sorry there is no number posted,  would that petcock be on any other bikes?  i can check that way

yes all the 83 cb650's use it as do the dohc 750 and 900 from 80-84

[pyro139]

sorry there is no number posted,  would that petcock be on any other bikes?  i can check that way

yes all the 83 cb650's use it as do the dohc 750 and 900 from 80-84

few years ago had chance to get some microfishe right now kicking self i didnt get it, a shop in my area offered sell me full stock for $50cdn after they transfered it all to cd, 7 months later they went out biz

[pyro139]

just bumping so people dont forget me.

[snyquist53]

16950-461-751


is that it?

[pyro139]

matters is the retaining nut is 18mm then yes.

[pyro139]

The part number was whatever was listed at the dealer on their fiche. It cost about $50 and came with the filter. May have been a 16950-461-771 as listed at www.crotchrocket.com under 1981, cb650c, fuel tank. The filter alone is $30 to buy seperate so your only paying $20 for the petcock. Too bad it isn't available seperate. By the way, saw your build thread, looks good. I will have to get around to posting mine. I do have a used spare petcock without the filter, you can have it if you want it, just taking up room in my toolbox. You would be better off getting the new one with the filter and be done with it. -Dave

does the spare work proper? i am having a custom adapter made to fit a high flow chrome harley style petcocke to tank, but the shop been very busy so just need some thing till its ready the old one fell apart when cleaning tank

[pyro139]

Works as far as I can tell. Never rode with it. does not leak and holds back fuel so.... Anyways, why do you need a high flow?, the OEM works fine IMO.

just want the chrome  realy it can be run as high flow or normal since we have cv carbs will be same no matter how run it.

[pyro139]

canuck you going be around dundass saturday? i'll probaly be out that way saturday, the dq there does a good softserve dip cone