« previous next »
Pages: [1]   Go Down

Author Topic: Where can I get springs for the advane mechanism on my CB75K3?  (Read 883 times)

0 Members and 1 Guest are viewing this topic.

Offline roadkill savior

  • Full Member
  • *
  • Posts: 57
    • Hondachopper
Where can I get springs for the advane mechanism on my CB75K3?
« on: July 09, 2007, 03:13:50 PM »
Please Help!!!

The dealer doesn't carry them and my advance seems to come in too fast and it doesn't quite settle back down to the F. It's close but I think the springs are week.

So what are we using and who can get me some?
Logged

Offline RRRToolSolutions

  • Expert
  • ****
  • Posts: 1,167
  • I love old Japanese bikes!
Re: Where can I get springs for the advane mechanism on my CB75K3?
« Reply #1 on: July 09, 2007, 03:50:29 PM »
I have two complete advance units - one has 9,000 miles one is NOS. PM me if you are interested in purchasing. I've gone to a Dyna 2000 on an 836 built motor - I'm not going back and I'm not doing another 750.

Regards,
Gordon
Logged
Kaws, Hondas, Yamahas, and Suzukis - especially Kaws

Offline roadkill savior

  • Full Member
  • *
  • Posts: 57
    • Hondachopper
Re: Where can I get springs for the advane mechanism on my CB75K3?
« Reply #2 on: July 09, 2007, 05:33:50 PM »
anybody else?
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 15,012
  • CB500 Number 1000036
Re: Where can I get springs for the advane mechanism on my CB75K3?
« Reply #3 on: July 11, 2007, 07:22:24 AM »
Aint available seperate, you have to buy the complete mechanism
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: Where can I get springs for the advane mechanism on my CB75K3?
« Reply #4 on: July 11, 2007, 10:17:04 AM »
Make sure the cam is rotating freely on the advancer shaft.

You can also cut half a coil off the spring and re-form the loop on the end.
Logged
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen
Pages: [1]   Go Up
« previous next »