Topic: 69'-70' Wiring harness

[jazzmotorsports]

Hi all,

So i picked up a 76' 750k and what seems to be a 1969-70 wiring harness.  Since I am removing the horn, signal buzzer, and clutch switch anyway im cool with the simplified wiring harness.  My question is that the trun signal switch from the 76' has a few extra wires for what i assume are a tad different bulbs in the signals .  Do I have to add these extra wires in order for the turn signal switch to work?  On the earlier harness the switches are much more simplified.

Thanks,
Jay

[736cc]

The 76 has signal running lights on all the time, and a dfferent plug for the key switch. If you change to 69/70/71 handlebar switches it'd work ez. Look at a color coded wire diagram in a shop manual to compare in detail.

[bryanj]

Just dont connect the extra wire but do insulate them individualy. Key switch may be more problematic tho

[jazzmotorsports]

Thanks guys.  That what i was thinkin.  Can i just completely remove the wires from the switch?

Jay