Author Topic: Need some advice  (Read 909 times)

0 Members and 1 Guest are viewing this topic.

Offline InfraRedSVTF

  • Full Member
  • *
  • Posts: 14
Need some advice
« on: August 30, 2007, 05:07:23 PM »
My 76' CB550F is leaking oil real bad from around the jug area, and I plan to pull the head and jugs off at the end of the riding season. The bike has 46K miles on it, is there anything else I should do while I have it apart? I did not do a compression test yet, but I plan to shortly. I would like a little more power from the bike, while keeping it reliable. Any info will be greatly appreciated.

Scott
'76 Honda CB550F

Stevien1

  • Guest
Re: Need some advice
« Reply #1 on: August 30, 2007, 07:07:24 PM »
Replace the piston rings, hone the cyls, and replace the cam chain.  Maybe look into some cyl head porting and a performance camshaft.

Offline InfraRedSVTF

  • Full Member
  • *
  • Posts: 14
Re: Need some advice
« Reply #2 on: September 02, 2007, 09:30:40 AM »
Thanks. I may look into some of that, If needed I may have it bored over and new pistons.
'76 Honda CB550F