« previous next »
Pages: [1]   Go Down

Author Topic: Dripping SOHC4 carbs  (Read 4011 times)

0 Members and 1 Guest are viewing this topic.

Offline Aaron J Williams

  • Old Biker
  • Hot Shot
  • ***
  • Posts: 532
  • Member # 725
    • Dude's Garage
Dripping SOHC4 carbs
« on: July 09, 2007, 01:53:56 PM »
Here is something to look for if your float levels are set right and you can't stop the carbs from dripping from the overflow tubes.



The brass tube is cracked lengthwise down the side and gas seeps through the crack no matter where the float level is set. I am going to try soldering this one up and i'll update if sucessful.
Logged
There are old bikers and there are bold bikers but there are very few old, bold bikers.

Quote from: Gordon
Not doing what you can to make your bike ride-able during the best riding months of the year kind of defeats the purpose of owning it in the first place.

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Dripping SOHC4 carbs
« Reply #1 on: July 10, 2007, 08:01:57 AM »
yep,btdt
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

luvhonda750

  • Guest
Re: Dripping SOHC4 carbs
« Reply #2 on: July 10, 2007, 11:19:54 AM »
youch, that is one thing I never looked for when my #4 carb was dripping, it turned out to be a float issue. You cleaned them up good!
Logged

Offline Aaron J Williams

  • Old Biker
  • Hot Shot
  • ***
  • Posts: 532
  • Member # 725
    • Dude's Garage
Re: Dripping SOHC4 carbs
« Reply #3 on: July 10, 2007, 02:31:08 PM »
Quote from: luvhonda750 on July 10, 2007, 11:19:54 AM
You cleaned them up good!
Carb dip acid works wonders!
Logged
There are old bikers and there are bold bikers but there are very few old, bold bikers.

Quote from: Gordon
Not doing what you can to make your bike ride-able during the best riding months of the year kind of defeats the purpose of owning it in the first place.

tntrainman

  • Guest
Re: Dripping SOHC4 carbs
« Reply #4 on: October 15, 2007, 10:19:20 AM »
here is a quick and very cheap fix for small cracks in metal floats as well as overflow pipes.  get some fingernail polish(your choice of colors or clear) and give the offending spot a couple of coats.  let it cure and voila! it works.  this has been a standard practice in the repair of small engine carburators for years.  whenever cleanout plugs are reinstalled they are sealed with the fingernail polish.  it will last indefinitely.

jon   
Logged

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Dripping SOHC4 carbs
« Reply #5 on: October 16, 2007, 01:47:47 PM »
cool deal,have to give that a try in the near future
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3
Pages: [1]   Go Up
« previous next »