« previous next »
Pages: [1]   Go Down

Author Topic: wires...help  (Read 1173 times)

0 Members and 1 Guest are viewing this topic.

Offline cb650 bobber

  • Expert I ain't no stinken
  • Expert
  • ****
  • Posts: 968
  • stupid gloripope
wires...help
« on: September 04, 2007, 01:46:32 PM »
my wires and spark plug caps are in bad shape where can I get new caps and should I replace the wires or not.
Logged
"I make a point of staying right at the edge of poverty. I don't have a pair of pants without a hole in them, and the only pair of boots I have are on my feet. I don't mess around with unnecessary stuff, so I don't need much money. Von Dutch

Offline Rsnip988

  • Expert
  • ****
  • Posts: 1,104
Re: wires...help
« Reply #1 on: September 04, 2007, 02:20:16 PM »
what bike is it for?

you can get plug caps at almost any auto parts store, local dealer, online (jcwhitney, etc)

more details would be helpful though
Logged
R.K.S.

1976 CB750 K6 Full

1976 CB750 K6 Cafe'ish

Offline hymodyne

  • Expert
  • ****
  • Posts: 1,302
Re: wires...help
« Reply #2 on: September 04, 2007, 03:42:04 PM »
more information about your bike would help folks respond intellegently. some coilpacks have integral wires others have wires that can be disconnected. Many insist on copper wire core plug wires, I've got accel coils and stranded wires and non resistor caps, but ran copper wires and ngk resistor plug caps before that...

hym
Logged
"All things are ready if our minds be so."

Offline cb650 bobber

  • Expert I ain't no stinken
  • Expert
  • ****
  • Posts: 968
  • stupid gloripope
Re: wires...help
« Reply #3 on: September 05, 2007, 06:43:48 AM »
cb650
Logged
"I make a point of staying right at the edge of poverty. I don't have a pair of pants without a hole in them, and the only pair of boots I have are on my feet. I don't mess around with unnecessary stuff, so I don't need much money. Von Dutch

Offline ChevelleSSLS6

  • Enthusiast
  • **
  • Posts: 131
  • Member #4051
    • my myspace, yay.
Re: wires...help
« Reply #4 on: September 05, 2007, 09:44:13 AM »
there's a thread around here somewhere that is a how-to so you can use new wires without getting new coils.  I'd give the search button a run for its money.

edit: I was nice and did the dirty work for you.
http://www.sohc4.us/forums/index.php?topic=17310.0
« Last Edit: September 05, 2007, 09:46:47 AM by ChevelleSSLS6 »
Logged
"What about incomplete idiots?" -TwoTired
"What's a leakdown test?  I filled the cylinder that looks like this with some water and let it sit overnight. The water didn't go down any.  I thought that would tell me about the rings." -Dead Guy of AMCforums
 
1977 CB550f- sold
2007 Kawi EX650- curre
Pages: [1]   Go Up
« previous next »