Author Topic: Nitrous Kit for my CB (Read 3991 times)

sparty · « **on:** September 11, 2007, 07:15:31 PM »

Here is the kit I bought. A couple of guys wanted to see it.

It can be set for 36 up to 60 HP. I bought the 12oz. bottle. It is much smaller than the one in the pic.

Sparty

MRieck · « **Reply #1 on:** September 11, 2007, 07:21:24 PM »

A small, wet system...it will work. I wish I knew that when I had the head as I could have tigged and tapped bosses for the nozzles. You can plug them when not in use. I did it on my ex partners bike.

sparty · « **Reply #2 on:** September 11, 2007, 07:26:46 PM »

Wanna race?

I won't put it on until the spring. I need to break the beast in first. Then I will only use it on the track and on my commute.

The tech guy told me he is sending me additional instructions and that I could expect wheelies in fourth and fifth gear. I may have to fab a wheelie bar.

sparty · « **Reply #3 on:** September 11, 2007, 07:32:42 PM »

Quote from: MRieck on September 11, 2007, 07:21:24 PM

A small, wet system...it will work. I wish I knew that when I had the head as I could have tigged and tapped bosses for the nozzles. You can plug them when not in use. I did it on my ex partners bike.

I guess I'll be bringing the engine back to Boston then.

jaguar · « **Reply #4 on:** September 11, 2007, 08:27:15 PM »

where did you get that kit?

Sam Green Racing · « **Reply #5 on:** September 11, 2007, 09:28:45 PM »

Quote from: MRieck on September 11, 2007, 07:21:24 PM

A small, wet system...it will work. I wish I knew that when I had the head as I could have tigged and tapped bosses for the nozzles. You can plug them when not in use. I did it on my ex partners bike.

Mike, with a wet system, he will need another gas tap will he not ?

Sam.

scunny · « **Reply #6 on:** September 11, 2007, 10:01:52 PM »

how long will a bottle last ?
do you just have a seperate fuel supply to the engine, by- passing the carbs ?

Jerry Rxman Griffin aka MuthaF'er · « **Reply #7 on:** September 11, 2007, 10:05:14 PM »

Sparty,

DAMN!!

. Don't flip that sum#$%* over and ruin everything!

Sam Green Racing · « **Reply #8 on:** September 11, 2007, 10:22:48 PM »

Quote from: scunny on September 11, 2007, 10:01:52 PM

how long will a bottle last ?
do you just have a seperate fuel supply to the engine, by- passing the carbs ?

Scunny, a bottle of nitrous will last forever if you don't use it.

If you do use it, you need a seperate fuel suply to a slenoid that feeds into the inlet tracts, you also have the same for the nitrous.

Sam.

Big Jay · « **Reply #9 on:** September 11, 2007, 10:31:35 PM »

What kind of rods do you have in it?

Jay

Sam Green Racing · « **Reply #10 on:** September 11, 2007, 10:45:42 PM »

A bit off topic but worth a laugh.
We were at a drag meeting last weeknd and stayed at a camp site near the track.
We pitched our tents and were making our way to the wash room.
As we passed a large motor home, we heard a voice from inside mutter "where's those bloody frozen peas"
We had to laugh as we knew the guy was on his own.
On our way back, we asked him had he found them, Yes he replied they were hiding in the freezer behind my nitrous bottle.

His name is Keith Parnell, he was the first person this side of the big pond to run in the 8s.
Keith is 70 and still going strong.

Sam.

MRieck · « **Reply #11 on:** September 12, 2007, 05:37:38 AM »

Quote from: SamCR750 on September 11, 2007, 09:28:45 PM

Quote from: MRieck on September 11, 2007, 07:21:24 PM
A small, wet system...it will work. I wish I knew that when I had the head as I could have tigged and tapped bosses for the nozzles. You can plug them when not in use. I did it on my ex partners bike.

Mike, with a wet system, he will need another gas tap will he not ?

Sam.

Sam Art would need at least a single Pingle petcock. A double would be better (that's what I have on my FJ)

MRieck · « **Reply #12 on:** September 12, 2007, 05:38:21 AM »

Quote from: Big Jay on September 11, 2007, 10:31:35 PM

What kind of rods do you have in it?

Jay

Falicons with the good bolts.

sparty · « **Reply #13 on:** September 12, 2007, 06:42:18 AM »

Quote from: Big Jay on September 11, 2007, 10:31:35 PM

What kind of rods do you have in it?

Jay

Falicon Knife-Edge

sparty · « **Reply #14 on:** September 12, 2007, 06:45:05 AM »

Quote from: jaguar on September 11, 2007, 08:27:15 PM

where did you get that kit?

Here: http://www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=176

333 · « **Reply #15 on:** September 12, 2007, 09:00:38 AM »

Quote from: sparty on September 11, 2007, 07:26:46 PM

Then I will only use it on the track and on my commute. .

And trips to the store. And rides in the evening. Out to lunch or dinner.

Never at dusk.

old750 · « **Reply #16 on:** September 12, 2007, 09:05:09 AM »

What kind of hp will you be getting at the rear wheel?

Sam Green Racing · « **Reply #17 on:** September 12, 2007, 12:38:33 PM »

About 150

Sam.

old750 · « **Reply #18 on:** September 12, 2007, 12:48:27 PM »

are you kidding me? what have you done to the motor?

Jinxracing · « **Reply #19 on:** September 12, 2007, 04:06:46 PM »

I'd like to know too...Sparty, what are the projected performance figures for your bike when all is said and done?

Sam Green Racing · « **Reply #20 on:** September 12, 2007, 05:01:36 PM »

How long is a piece of string ?

I was just guessing at 150 Jinxy.

Sam

sparty · « **Reply #21 on:** September 12, 2007, 07:23:06 PM »

The rear wheel HP with the NOS will be in the neighborhood of 150 RWHP with the 60 shot of NOS. The RWHP without NOS should be around the low 90s.

Check out my build page: http://www.basd.net/staff/aentz/CB750/CB750_page.htm

Sam Green Racing · « **Reply #22 on:** September 12, 2007, 07:32:41 PM »

Am I good at guessing or what

Sam.

sparty · « **Reply #23 on:** September 12, 2007, 07:35:33 PM »

Quote from: SamCR750 on September 12, 2007, 07:32:41 PM

Am I good at guessing or what

Sam.

Sam,

You are good at everything... that is what we hear on this side of the pond.

I can't wait to see your dyno figures on Chris's bike. Next week right?

Art

sparty · « **Reply #24 on:** September 12, 2007, 07:36:24 PM »

Quote from: old750 on September 12, 2007, 12:48:27 PM

are you kidding me? what have you done to the motor?

EVERYTHING POSSIBLE.

News:

Author Topic: Nitrous Kit for my CB (Read 3991 times)