Author Topic: New from Alabama!  (Read 1048 times)

0 Members and 1 Guest are viewing this topic.

Offline lhemrick

  • Enthusiast
  • **
  • Posts: 113
New from Alabama!
« on: October 05, 2007, 02:07:45 PM »
Hi,
New to this site and trying to bring a 72 CB350F back to life. I can tell this site can and will be a lot of help in that effort. The bike hasn't had a tag since 1982 so this will be a challange I'm afraid but my 14 year old son and I are willing to give it a try. I'm sure I will need some help and advice.

Thanks
Lynn Hemrick
Don't give up; Rust is only Temporary!
77 Honda CB750
70 Honda CB350 twin
71 Honda CB350 twin
72 Honda CB350 Four
72 Honda CB175
81 KZ550C2
81 KZ750H2
82 KZ750M1 CSR
84 ZN700 Shaft

Offline hoodellyhoo

  • CB350F
  • Master
  • *****
  • Posts: 1,726
Re: New from Alabama!
« Reply #1 on: October 05, 2007, 02:14:23 PM »
Welcome! I can assure you that this site will provide anything you need to get your bike going again. It sure helped a complete novice like myself revive my 350f.
1972 CB350F (Back from the Dead!)- http://forums.sohc4.net/index.php?topic=20822.0
1965? S65 - Coming Eventually!
1972 CB750K2 (father-son project)
1976 CB750K6- (sold) http://forums.sohc4.net/index.php?topic=96859.0
1976 CB750K6 (sold)- http://forums.sohc4.net/index.php?topic=62569.0

Offline mattcb350f

  • Hardly a
  • Master
  • *****
  • Posts: 1,625
  • 1974 CB350F
Re: New from Alabama!
« Reply #2 on: October 05, 2007, 04:30:59 PM »
Hi Lynn, Welcome to SOHC/4. Sounds like you and your son have a nice project to work with. If it hasn't been taged since 82' than it probably doesn't have a lot of wear. Just started a 74' 350F myself, I've found it to be a nice sized bike to work with as a first project and as hoodellyhoo said, all the information you need is right here. And If it isn't, just ask.  ;)
 Matt.
1974 CB350F,  1980 CB125S,  1981 XL80S
Non Honda's: 86 & 87 Husqvarna 400wr's

My CB350F resto: http://forums.sohc4.net/index.php?topic=30467.0
Gallery at:
http://gallery.sohc4.net/main.php?g2_itemId=298318

Offline 6adan

  • Hot Shot
  • ***
  • Posts: 421
Re: New from Alabama!
« Reply #3 on: October 07, 2007, 04:26:15 AM »
 Hello Lynn; Where are you at in Alabama? This is a good place to get answers. One of the first you need is a shop manuel for your bike. Good luck Dannie
1970 CB750 JDM,1975 GL1000, 1979 GL1000, 1979 CBX, 1995 GL1500, 2000 GL1500CT Valkyrie, 2008 GL1800 Trike.

Offline toycollector10

  • Expert
  • ****
  • Posts: 1,134
Re: New from Alabama!
« Reply #4 on: October 07, 2007, 04:35:38 AM »
Hi, hello from New Zealand. Good luck with your project. This is a great site and I have learned a lot and so will you. Cheers, Mark..
1969  CB 750 K0
1973  CB175
1973  Z1 Kawasaki

Offline steven400/4

  • tyre inspector
  • Hot Shot
  • ***
  • Posts: 518
  • that nice
Re: New from Alabama!
« Reply #5 on: October 07, 2007, 10:28:42 AM »
welcome from the uk  ;D
steve ;)
1978 honda 400/4 f2 my baby

Offline cben750f0

  • nothin draws attention like a classic bike!!
  • Master
  • *****
  • Posts: 1,612
  • '75 CB750F0 Gladstone NQLD OZ
Re: New from Alabama!
« Reply #6 on: October 07, 2007, 10:48:55 AM »
Make that 2 big g'days from New Zealand!!!

welcome M8...

peace
you are never to old, to act like a kid... be safe
funny thing,chasing someone down hill on a bike 30 years older than theirs..
he said \\\\\\\'it was like watching a 250kg unguided weapon getting stuck up you bum\\\\\\\ http://www.bikepics.com/members/trixtrem/