Author Topic: Okay, Just Go Ahead And Shoot Me And Get It Over With!  (Read 1632 times)

0 Members and 3 Guests are viewing this topic.

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Okay, Just Go Ahead And Shoot Me And Get It Over With!
« on: October 12, 2007, 06:23:01 AM »


       I was doing just fine and then I came across this on ebay! I mean this thing's at $340 now with alittle over 2 days left! :-\ A 73' 450 motor that is ready for some action. Ya just might as well shoot me and put me out of my misery! ::)

           


                                   I'm dying here,  Bill :-\ :)
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Okay, Just Go Ahead And Shoot Me And Get It Over With!
« Reply #1 on: October 12, 2007, 06:35:05 AM »
Breathe deep and think of a babbling stream, see the water dance across the rocks. Hear the Robins chirping in the trees. Let it pass Bill. On the other hand, we are all gonna be dead longer than we are going to be alive, so go for it! 
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline ProTeal55

  • Old Timer
  • ******
  • Posts: 4,887
  • Est1968.com
    • Joe's Barbershop Chicago
Re: Okay, Just Go Ahead And Shoot Me And Get It Over With!
« Reply #2 on: October 12, 2007, 06:41:40 AM »
Thats pretty...
Joe a.k.a ProTeal55 a.k.a JoeyCocks a.k.a Maker of Friends

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Okay, Just Go Ahead And Shoot Me And Get It Over With!
« Reply #3 on: October 12, 2007, 06:51:10 AM »
Breathe deep and think of a babbling stream, see the water dance across the rocks. Hear the Robins chirping in the trees. Let it pass Bill. On the other hand, we are all gonna be dead longer than we are going to be alive, so go for it! 

          The first part of your response is what I really need to do. I can, in no way afford the price this sucker is going to get to. I've got too many other irons in the fire. I forgot to post the ebay listing too.

                 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=190160774258&ssPageName=STRK:MEWA:IT&ih=009

                               
                                     Later on, Bill :) ;)
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline Tim.

  • Master
  • *****
  • Posts: 1,945
  • www.DOTHETON.com
    • DO THE TON
Re: Okay, Just Go Ahead And Shoot Me And Get It Over With!
« Reply #4 on: October 12, 2007, 07:13:19 PM »
How on earth did that engine come off a running bike, as-is and not be a restored mill?

I'd like to see the rest of the bike if the engine was that nice.
Roule comme dans les annĂ©es 70...   Roll as in the Seventies...

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Okay, Just Go Ahead And Shoot Me And Get It Over With!
« Reply #5 on: October 12, 2007, 07:50:38 PM »
How on earth did that engine come off a running bike, as-is and not be a restored mill?

I'd like to see the rest of the bike if the engine was that nice.


        I hear ya, I can only imagine about the rest of the bike. Also, I'm wondering WHY someone would take it apart. I know the money is pretty good for parts but, I sure couldn't do it. I guess if I was desperate, I might though.

                                  Later on, Bill :) ;) 
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Okay, Just Go Ahead And Shoot Me And Get It Over With!
« Reply #6 on: October 14, 2007, 10:00:30 PM »



        That 450 motor sold for $995 and had 23 bids on it! :o ::) There's no telling how high it would have gone if I had of had some bucks to use to try to get it! "Can anybody say Sky High? ???

        Also, there was a 68' CB450 gas tank that would have made a nice addition to a 450 build, that went for $201 with 3 bids. 

         


             
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!