I was basking in the glory of my bike finally running great, I was riding it work 16 miles roundtrip everyday on the freeway at speeds in excess of 70 and still had power. So i come home one day, park the bike, then decide to go for a ride after dinner. There was a small puddle of gas under the bike(again). After checking it out, i saw it was dripping from the hose going from the petcock to the carbs. This hose had no clamps on it or anything. So i get a little hose clamp and put it on there. Sort of stopped the leaking but not all the way. Also I noticed that the petcock wasnt screwed into the the tank, waht i mean was it wasa loose. So i tightened that back up. Then i took it out for a ride and it was popping and sputtering and wouldnt even rev. So i was like WTF. So then i go to the local auto parts store, get a new hose and put it on. I took the petcock out and it looked clean as hell, a little bent but not serious(i think). I put it back in hand tight and connected the the hose. Started it up and it still sputters and pops and backfires and wont rev.... help!!!