« previous next »
Pages: [1]   Go Down

Author Topic: Store Bought Pin Wrench for wheel bearing retainers  (Read 4208 times)

0 Members and 1 Guest are viewing this topic.

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Store Bought Pin Wrench for wheel bearing retainers
« on: April 08, 2012, 09:02:12 PM »
Harbor Freight has a decent pin wrench for $5. Adjustable to fit different retainers. I'd grind the pins down myself, they are a little long..  And the homemade flat bar with 2 bolts tool is still better. But with the stakes drilled out this wrench will turn the retainer.


Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline Brookesy in Oz

  • Full Member
  • *
  • Posts: 49
Re: Store Bought Pin Wrench for wheel bearing retainers
« Reply #1 on: September 28, 2012, 01:11:26 PM »
I got something similar here in Australia - at Bunnings (in with the angle grinder accessories)
Shortened the pins a bit, they seemed pretty long, and after drilling out the punch marks on the retainers it worked fine.
It makes the distance for the rear retainers (just)
Logged
Honda CB750 K1 - awesome
Honda CB450 K5 - current project
Honda CB750 K2 - sold
Kawasaki Z1000 - sold
Pages: [1]   Go Up
« previous next »