« previous next »
Pages: [1]   Go Down

Author Topic: anubis cycle??  (Read 2231 times)

0 Members and 2 Guests are viewing this topic.

Offline hymodyne

  • Expert
  • ****
  • Posts: 1,302
anubis cycle??
« on: December 11, 2007, 08:36:46 AM »
I just went looking for elcheapo's web site, anubis cycle, and came up with nothing. I've sent him a PM but I'm wondering if anyone has had any dealings with him recently. I know as of mid august he had posted that personal issues were affecting his  MC life...

I'm in need of his work to finish a dual disc conversion I'm working on for my 500K1; he drilled my first disc last winter (at a very fair price) and I'd like to have him do the same fon this second disc i just picked up.

If he's not available, I'm open to suggestions to folks who could replicate the drilling pattern of the first disc.

hym
Logged
"All things are ready if our minds be so."

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: anubis cycle??
« Reply #1 on: December 11, 2007, 08:59:58 AM »
hym

Could you clamp the two discs face to face and then drill through the exsisting holes into the second disc?

Would be quicker and cheaper.

You can also find dual hose banjo bolts at most motorcycle shops or from Speigler.
http://www.spieglerusa.com/

FJ
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,488
Re: anubis cycle??
« Reply #2 on: December 11, 2007, 12:54:14 PM »
i swapped emails with tom before thanksgiving,at that time he said he was down temporarily and should be goin again in 2 weeks,well thats been more than 2 weeks ago,if he isnt up yet,then i dont know what to say.i will email him and see whats goin on,if/when i hear something ill let ya`ll know.
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline hymodyne

  • Expert
  • ****
  • Posts: 1,302
Re: anubis cycle??
« Reply #3 on: December 11, 2007, 01:54:30 PM »
many thanks. I think he does great work and want to support a site member.

hym
Logged
"All things are ready if our minds be so."

Offline mrosso

  • Enthusiast
  • **
  • Posts: 189
  • The before picture.
Re: anubis cycle??
« Reply #4 on: December 11, 2007, 03:00:57 PM »
I'd be interested in knowing what's up as well. I sent him a rotor and $ a couple months back to get drilled and haven't hear or seen anything since.
Logged

Andoo

  • Guest
Re: anubis cycle??
« Reply #5 on: December 12, 2007, 08:53:33 AM »
Quote from: mrosso on December 11, 2007, 03:00:57 PM
I'd be interested in knowing what's up as well. I sent him a rotor and $ a couple months back to get drilled and haven't hear or seen anything since.

Sounds like my experience with him...
Logged

Offline johnny

  • Hot Shot
  • ***
  • Posts: 315
Re: anubis cycle??
« Reply #6 on: December 15, 2007, 03:13:51 PM »
After about a month and a half, I FINALLY received two drilled rotors from Anubis. Better late than never, I guess. For what it's worth, he did keep me updated periodically via email and offered a sincere apology for the delay.
I'm simply glad to have them back since I nearly accepted the fact they would be gone forever.
The workmanship appears good although I was expecting a larger amount of holes in varying diameters - similar to examples pictured on the website (before it went down). Instead, it's a simple alternating 3 2 pattern of the same diameter.
As I mentioned, I'm glad to have them back. I wish Thomas well with his personal issues and hope he's back in business soon. Would I order from him again? Most likely not.
For those still waiting, don't give up hope.
Logged
1976 CB550K
1974 CB350F http://forums.sohc4.net/index.php?topic=81781.0
1974 CB550K
1972 CB350 Twin
1965 Lambretta
196(?) Honda S90
1975 Ford Bronco

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,565
  • Big ideas....
Re: anubis cycle??
« Reply #7 on: December 15, 2007, 04:32:28 PM »
Quote from: johnny on December 15, 2007, 03:13:51 PM
After about a month and a half, I FINALLY received two drilled rotors from Anubis. Better late than never, I guess. For what it's worth, he did keep me updated periodically via email and offered a sincere apology for the delay.
I'm simply glad to have them back since I nearly accepted the fact they would be gone forever.
The workmanship appears good although I was expecting a larger amount of holes in varying diameters - similar to examples pictured on the website (before it went down). Instead, it's a simple alternating 3 2 pattern of the same diameter.
As I mentioned, I'm glad to have them back. I wish Thomas well with his personal issues and hope he's back in business soon. Would I order from him again? Most likely not.
For those still waiting, don't give up hope.
What did it cost you?
Logged
Owner of the "Million Dollar CB"

Offline hymodyne

  • Expert
  • ****
  • Posts: 1,302
Re: anubis cycle??
« Reply #8 on: December 16, 2007, 08:11:37 AM »
my single disc was 40-45 dollars plus shipping to WI from MA.

hym
Logged
"All things are ready if our minds be so."

Offline DrMark

  • Hot Shot
  • ***
  • Posts: 263
Re: anubis cycle??
« Reply #9 on: December 17, 2007, 03:48:41 PM »
I thought I read another thread not that long ago about Tom being injuried and was on the mend. He said something about finishing up the jobs that were already paid for and not taking any new orders until then. Thats why the website was temporally shut down. Hope this helps for some of you. I'm waiting too....would like to get my front rotor done before nest year's riding season. DrMark
Logged
1978 CB550K
1983 CB650SC Nighthawk

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: anubis cycle??
« Reply #10 on: December 17, 2007, 05:12:23 PM »
There's another thread about Tom's misadventures here somewhere. last I saw, things weren't going too well for him at all. :'(
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,488
Re: anubis cycle??
« Reply #11 on: December 18, 2007, 11:55:02 AM »
just to update,i havent received a reply to my email to him.
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline my78k

  • I am Meat-O of the Hungry Horses MC
  • Old Timer
  • ******
  • Posts: 2,839
Re: anubis cycle??
« Reply #12 on: December 21, 2007, 12:24:45 PM »
FYI...I got to thinking of Tom and went to find his website and was met with the following:

WE ARE PRESNTLY REGROUPING

No new orders will be accepted at this time.

Orders that are in process will be addressed as fast as I can.

Orders in process for gauge faces that can not be filled at this time will be refuded.

Rotors will be drilled. Most of these are done and will be shipped all at once.

We thank you for your patronage.

When we are completely ready to sell again the site will reopen with the original content as well as some new things and an explantion of just what has been happening.

Now off to answer my email if possible, over 3,000 messages!





Sounds like he will be back and better than ever (or so some of us hope!)

Dennis
Logged

Offline neil young

  • striving to be an
  • Expert
  • ****
  • Posts: 931
  • A penny saved..is obviously a government oversight
Re: anubis cycle??
« Reply #13 on: December 21, 2007, 12:44:50 PM »
i have never dealt with Tom.but i hope that things work out for him and those that are dealing with him at the moment.
i have had some personal problems before and it can wear you down unfortunatly.but eventually things come back together.usualy for the better :)
Logged
1972 CB500 k1
1974 CB550
1977 cb 550
82 suzuki GS 750tz.......16  valves  baby
2008 Triumph Scrambler
Pages: [1]   Go Up
« previous next »