« previous next »
Pages: [1]   Go Down

Author Topic: 77 cb550K wheel spacers  (Read 1034 times)

0 Members and 1 Guest are viewing this topic.

Offline SEBNN

  • Enthusiast
  • **
  • Posts: 123
77 cb550K wheel spacers
« on: December 23, 2007, 07:04:36 pm »
I just wanted to verify, are there any spacers on the cb 550 other than the aluminum one on the brake side and the sprocket cover plate on that side.  Looking at the parts diagrams it isn't clear so I wanted to make sure how much room I have for my disc and caliper on the other side.
« Last Edit: December 23, 2007, 07:06:28 pm by SEBNN »
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 13,896
  • CB500 Number 1000036
Re: 77 cb550K wheel spacers
« Reply #1 on: December 23, 2007, 10:45:55 pm »
There is a spacer outboard of the brakeplate and one on the sprocket side that wont come out untill you separate the steel outer plate and sproket carrier
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline SEBNN

  • Enthusiast
  • **
  • Posts: 123
Re: 77 cb550K wheel spacers
« Reply #2 on: December 23, 2007, 11:00:00 pm »
Quote from: bryanj on December 23, 2007, 10:45:55 pm
There is a spacer outboard of the brakeplate and one on the sprocket side that wont come out untill you separate the steel outer plate and sproket carrier

Thanks, I wanted to make sure that I hadn't misplaced it and that I would have enough room for the caliper.  Now I just need to make a new spacer and a carrier for the rotor and weld it up and I will have a rear disc.  If only that were the end :).  Thanks again!
Logged
Pages: [1]   Go Up
« previous next »