Topic: CB750K (export) low handlebar?

[USN20]

I'm "assuming" that Honda used a low-rise bar on some non-US CB750K export models.

A few example photo's:

http://www.bikepics.com/pictures/669970/

http://www.bikepics.com/pictures/480451/

http://restorefour.free.fr/Galerie/cb750_jean-luc_2.jpg

http://restorefour.free.fr/Galerie/CB750%20Denis%20Vincent%201.jpg

My Honda parts book covers US models only

I'm trying to locate a pair for the K0 thru K6 model (K-series) - Anyone have a Honda part number or a source?   

Thanks in advance

 

[andy750]

You are right - the Euro models came with low rise bars and you will notice the master cylinder almost hits the tach. I think David Silver Spares still sells these bars or try CMSL. Or you can simply try Euro bars (which I did) which are a cheap alternative.

cheers
Andy

[azuredesign]

I have a set as well, they did not have access holes for the wires until I cut 'em in, but the shape is perfect. If you can get them from Silver with the factory holes, that would be tres cool.

Funny, I remember a walthy kid I went to high school with, Schertzer, can't remember his first name, was given a new gold k0 by his dad. I remember he had to have risers made for the longer american bars as they were just not long enough for him. Strange memory after 35+ years!

[bert96]

 This is what i bought,it's low,wide,light and pretty strong.mine we're dark grey,but now it's like chrome(buffing job).I bought it on ebay for much less tought.

http://www.faster-motocross.com/fmf-factory-909-handlebar.html

[754]

Found it oOOHHHH YEAH!!!

Right outa the Green book,

53100-300-610...is handlebar used in England, Germany, France, Netherlands.

53100-300-000 is the standard bars.
Anyone bought standards??, in about 2000, I went to the Honda shop, ordered them and a grab handle, and they were able to get them in.

[Deltarider]

IMHO you all should have Euro style bars. They make so much difference. I have never understood why USA models had these ridiculous handlebars. Yeah... if your riding is around town, cruising up and down mainstreet... I can see the point, but, man, you wanna ride that thing, don't you!?

[USN20]

Interesting that Honda decided to use the low bars on the CB750 European export model. Probably to further compete with the looks and handling of British bikes back in the day. With the part number now in hand (thanks 754) I'll see if the handlebar is still available from Honda, DSS or CMSL. If not, then it's off to the aftermarket. These bars on ebay look like they would get the job done:

http://cgi.ebay.com/ebaymotors/7-8-handlebars-UK-low-bars-Triumph-Norton-BSA-Honda_W0QQcmdZViewItemQQcategoryZ35610QQihZ002QQitemZ120201589770QQrdZ1QQsspagenameZWDVW

Flanders http://www.flandersco.com/ offers several low-rise Euro style bars and one has the cut-outs for the wiring.

I appreciate the replies.

Note to self: Find a green cover parts book

[Geeto67]

here's my K5 with cheapie generic superbike bars:



looks like it was made for the bike.

[gpdesign]

I just installed these superbike bars:
http://www.z1enterprises.com/detail.aspx?ID=2135

I'm glad I got these and not the european bars (http://www.z1enterprises.com/detail.aspx?ID=2760) as it appears that the center width of the Superbikes is .25 wider. When I installed them it looks like the extra .25 extra makes a difference.

Of course I had to drill the bars, run the wires etc. not too bad. But it is a slippery slope as I now need new shorter throttle cables and brake hose.

[andy750]

And here is mine (the big stock mirrors have now been replaced by bar-end mirrors)....



cheers
Andy

[kaysystems]

Is there a need to shorten the clutch cable with the lower bars?

David

[andy750]

No mine works ok with stock cable length.

cheers
Andy

[USN20]

If correct length throttle and clutch cables become a problem or concern when changing to different bars,

Motion Pro: http://www.motionpro.com/ makes custom length cables.

http://www.motionpro.com/custom/index.php

[bert96]

No mine works ok with stock cable length.

cheers
Andy

Me too!

[Hope]

looks like the same bars on the 550

[bryanj]

Well I put 750 on a 500 so it ought to work the other way, trouble is UK 500 bars are scarce and EXPENSIVE (£45 at last check)

[drackett_19]

I picked up these ones for pretty cheap. http://cgi.ebay.com/ebaymotors/honda-cb550-7-8-superbike-bars-chrome-cafe-110510_W0QQcmdZViewItemQQcategoryZ35587QQihZ011QQitemZ320199021331QQrdZ1QQsspagenameZWDVW

I had to cut some holes in them for the cables, but they're a solid handlebar. Here is a pic of them on my 550.

[mick750F]

  For something in between the Euro bars and the US "K" model bars I believe the US "F" model bars are lower than the US "K" bars but not as low as the Euro bars.

Mike

[Hope]

I have some 550 handlebars sitting in the shop & another set that came off when we took 'em off "project Jasper" in order to put the clubmans on.  Lemme know if you need some 550 handlebars.

[USN20]

  For something in between the Euro bars and the US "K" model bars I believe the US "F" model bars are lower than the US "K" bars but not as low as the Euro bars.

Mike

That's a good idea so I checked into a few part numbers: (Unfortunately they are no longer available from Honda) 

The (US) Honda is listing for the (CB750) 75-76 "F" handlebar is: 53100-341-700 and that part number also cross references to the 73-74-75-76 "K" model.

The (US) "F" handlebar changes again for 77-78 to: 53100-410-000 without any cross reference. They don't appear to be any lower than the earlier 75-76 "F" bars. Not having any measurements for these - it's hard to say for sure.

Honda bars are the ideal replacement as they already have the knurling, wiring cut outs and switch locating pin holes. This attached pic has the stock bars I'm trying to replace with lower ones:

[USN20]

I have some 550 handlebars sitting in the shop & another set that came off when we took 'em off "project Jasper" in order to put the clubmans on.  Lemme know if you need some 550 handlebars.

I appreciate the offer  

Honda lists two different part numbers for the 550 handlebars:

53100-374-000 used on the 74-75-76 550 "K"
53100-390-000 used on the 75-76 550 "F"

Would you be able to take your 550 handlebar measurements using this link as a guide?

http://www.sideroadcycles.com/ImportedMotorcycles/ImportHandlebars/ImportHandlebars.html

I need to get close to these numbers:

3.5"    rise or height
6.25"  pull back
4.75"  center width
31.5"  width

[Hope]

hmm....  I have handlebars from a 75 550K and a 76 550F.  I will look around in my shop for the handlebars and get back to you.

[mick750F]

  For something in between the Euro bars and the US "K" model bars I believe the US "F" model bars are lower than the US "K" bars but not as low as the Euro bars.

Mike

That's a good idea so I checked into a few part numbers: (Unfortunately they are no longer available from Honda) 

The (US) Honda is listing for the (CB750) 75-76 "F" handlebar is: 53100-341-700 and that part number also cross references to the 73-74-75-76 "K" model.

The (US) "F" handlebar changes again for 77-78 to: 53100-410-000 without any cross reference. They don't appear to be any lower than the earlier 75-76 "F" bars. Not having any measurements for these - it's hard to say for sure.

Honda bars are the ideal replacement as they already have the knurling, wiring cut outs and switch locating pin holes. This attached pic has the stock bars I'm trying to replace with lower ones:

   I have to admit that the info I provided on the "F" bars is what I believed to be true and not something I know as a definite fact.  Also, I was speaking of the 77/78 bars rather than the 75/76. I can check the dimensions of my bars today so you can have a reference point and properly chastise me if I was wrong.  And FWIW, the 77/78 "F" bars have all wiring running on the outside...no holes.

Mike

[USN20]

Mick750F, No worries - It's all good info to share    (Check your PM's)

[mick750F]

   I managed to get some numbers today....F3 stock bars. They are just approximate because I was hanging over stuff in the shop taking the measurements.

rise...7.5"
pull back...5.25"
center width...7"
width...32"

   I don't know how these compare to K bars but they aren't close to the numbers you're looking for so...happy hunting. 

Mike