Author Topic: who sells new rear spoked wheels for a 78k?  (Read 1039 times)

0 Members and 1 Guest are viewing this topic.

Offline mustangcar

  • Enthusiast
  • **
  • Posts: 194
who sells new rear spoked wheels for a 78k?
« on: January 11, 2008, 12:33:54 PM »
i see respoking kits ,but would prefer a complete assembled wheel,do they sell them complete?,my bikes rim is 2.50x17 thanks

fuzzybutt

  • Guest
Re: who sells new rear spoked wheels for a 78k?
« Reply #1 on: January 11, 2008, 01:17:23 PM »
any particular reason you dont want to just respoke? it's not all that hard to do and even if you had someone else do the respoking it would be WAY cheaper than buying a whole new assembly, assuming that a full wheel assembly is available

Offline mustangcar

  • Enthusiast
  • **
  • Posts: 194
Re: who sells new rear spoked wheels for a 78k?
« Reply #2 on: January 11, 2008, 01:38:46 PM »
yeah your right,i should just send the rim for rechroming ,i'll try to tackle the respoking and trueing,if i find it too much i'll take it in ,I only found respoking kits for the rear in 18 inch,anyone try respoking by doing one spoke at a time?

Offline edbikerii

  • Master
  • *****
  • Posts: 2,128
    • Gallery
Re: who sells new rear spoked wheels for a 78k?
« Reply #3 on: January 11, 2008, 01:44:54 PM »
I've changed broken spokes one-at-a-time, without pulling the wheel off the bike, but you can't replace the nipples without deflating the tire and pushing the tire and tube aside.
SOHC4 #289
1977 CB550K - SOLD
1997 YAMAHA XJ600S - SOLD
1986 GL1200I - SOLD
2004 BMW R1150R

Jetting: http://forums.sohc4.net/index.php?topic=20869.msg258435#msg258435
Needles:  http://forums.sohc4.net/index.php?topic=20869.msg253711#msg253711

Offline jkotsi

  • Full Member
  • *
  • Posts: 34
Re: who sells new rear spoked wheels for a 78k?
« Reply #4 on: January 11, 2008, 08:57:46 PM »
I would like change my rear rim to a wider alloy and try respoking myself.
Can a rim from another bike be matched to the CB500 rear hub?

The rim is an Akront 18"  3.5  D40  -680-

Thanks Jim