Author Topic: Registry of 500/550 Owners (Three Tons of fun!!) (Read 216695 times)

rb550four · « **Reply #925 on:** March 25, 2013, 03:38:13 PM »

I thought one may have been forgotten , the may/june project the unchopper

this one started out as

This one is a 550
There may be a cafe 500 that I hadn't registered here either

And possibly this one

Sorry , not trying to screw up the count , these are not the ones that got wasted in the flood that have already been registered , they are the additional ones that followed me home

rb550four · « **Reply #926 on:** March 25, 2013, 04:02:17 PM »

Sorry, this was the April project. It's a sweep the floor 500, whatever was laying around ended up on this frame.

That 's it for now anyways.
So I'm caught up to March 23,2013. I write this because there are more projects that haven't been started yet and I'd like not to duplicate for an actual count when they get registered.

wowbagger · « **Reply #927 on:** March 25, 2013, 05:37:52 PM »

Here's my 1971 CB500. It's currently in a lot more pieces as it waits for various bits to get back. (Pipes getting ceramic coated, rotor getting drilled, rear fender getting replace, and the seat waiting for upholstery). Hopefully they're all back on by the time the snow melts.

hondalav · « **Reply #928 on:** April 06, 2013, 11:25:28 AM »

Bought this 550F last summer and slowly turned her into a road worthy bike again.
Kept her mostly original as aquired, only replacing parts that were gone. Got her through inspection this week and will register her next week. Happy days!

goldarrow · « **Reply #929 on:** May 13, 2013, 09:48:25 PM »

This one followed me home back in January.

Carb #4 was internally damaged, so swapped that out. Swapped out M bars with clip on bars, removed stock gauges, oil change, clutch gasket, oil pan gasket, shifter seal, fuel line and other misc stuff.

goldarrow · « **Reply #930 on:** May 13, 2013, 10:01:31 PM »

Brought this one back from the death, got new plate and tag for it last week.

Did few maintenance to stuff to it and now is a rider. Running rich but sorting it out as I go.

Bwatson · « **Reply #931 on:** May 31, 2013, 02:28:34 PM »

Quote from: wowbagger on March 25, 2013, 05:37:52 PM

Here's my 1971 CB500. It's currently in a lot more pieces as it waits for various bits to get back. (Pipes getting ceramic coated, rotor getting drilled, rear fender getting replace, and the seat waiting for upholstery). Hopefully they're all back on by the time the snow melts.

Thats my old bike! Lets see some pics of it now!

wowbagger · « **Reply #932 on:** May 31, 2013, 05:27:00 PM »

Awesome! You're the one I need to thank. I bought this bike in Laconia and knew very little about what I was getting into. Most of my research on this forum has led me to repeat the same two phrases over and over: "Oh, crap! I need to do that to my bike." And "Oh, wait, the PPO already did that."

I owe you at least a case of beer for all the time and money you've saved me.

That said, it wasn't running when I bought it. It had spent a year parked uncovered, outside and ridden rarely. Once I got it running again it was time to make some improvements. Dyna coils, rebuilt carbs, drilled rotor, braided hoses, ceramic coated pipes and a new tail light are what's been done so far. Still to do is to install the rearsets and the new headlight bucket and gauge cluster. Sadly, it's still in project mode but I'm hoping to get it back on the road at least partially finished in the next couple weeks.

davidtime · « **Reply #933 on:** June 01, 2013, 02:42:26 PM »

Here's my 77 550 mock up before tear down. It's getting prepped to be put back together now.

brooze72 · « **Reply #934 on:** June 02, 2013, 07:32:30 PM »

Quote from: davidtime on June 01, 2013, 02:42:26 PM

Here's my 77 550 mock up before tear down. It's getting prepped to be put back together now.

Looks good! Those are great pipes/muffs, what are they?

mono · « **Reply #935 on:** June 02, 2013, 08:19:41 PM »

Mines a 1975 550K off you want to add me to the list.

Sent from my SPH-L710 using Tapatalk 2

davidtime · « **Reply #936 on:** June 03, 2013, 07:42:05 AM »

Quote from: Brooze72 on June 02, 2013, 07:32:30 PM

Quote from: davidtime on June 01, 2013, 02:42:26 PM
Here's my 77 550 mock up before tear down. It's getting prepped to be put back together now.

Looks good! Those are great pipes/muffs, what are they?

As far as I know they are the original 78 exhaust. I love them and the look, not like you see on all the rest of the cafes. They are not in the greatest condition though a couple small holes, so they might stay, they might not. I do hope so though.

The bike in pieces at the moment. Check out my build in my signature.

doomsayer1976 · « **Reply #937 on:** August 01, 2013, 08:59:22 AM »

Here is my new & 1st bike

RAFster122s · « **Reply #938 on:** August 01, 2013, 09:20:57 AM »

doomsayer, very nice first bike

bender01 · « **Reply #939 on:** August 02, 2013, 11:33:03 AM »

Here's my new 77 550f! This was the day I got it in Barnet VT.

Mahoo · « **Reply #940 on:** August 09, 2013, 09:01:47 AM »

New to the club. Just picked up a 1977 550. 2 year project to tear down, clean up, tune up and paint.

RAFster122s · « **Reply #941 on:** August 09, 2013, 12:19:32 PM »

Welcome Mahoo and bender01.

r1-superstar · « **Reply #942 on:** August 12, 2013, 06:17:45 PM »

Here is my project. I picked her up Friday and can't wait to get started!

1971 CB500 with a 1975 CB550E in it.

Zaipai · « **Reply #943 on:** August 12, 2013, 08:07:23 PM »

Nice ride R1.. good start for sure.

KAgin · « **Reply #944 on:** August 25, 2013, 08:10:48 PM »

This is a before pic of my 1975. Progress has been slow and painful on getting it in shape.

RAFster122s · « **Reply #945 on:** August 25, 2013, 08:12:06 PM »

R1, nice bike.
welcome to SOHC/4s

RAFster122s · « **Reply #946 on:** August 25, 2013, 08:15:46 PM »

KAgin, welcome to SOHC/4s, nice bike to start your 550 ownership with...fond of the sunrise flake orange....

Sami1987 · « **Reply #947 on:** September 01, 2013, 12:12:44 PM »

Sami1987-1

bartsitarski · « **Reply #948 on:** September 01, 2013, 02:49:25 PM »

Bart Sitarski. 78 CB550k. Made a few mods but trying to keep it close to stock. Not drilling or cutting any original parts.

Sent from my XT1055 using Tapatalk 2

RAFster122s · « **Reply #949 on:** September 01, 2013, 06:21:56 PM »

Welcome Bart, nice 550. The original 4 into 4 are coveted pieces if in good shape and yours look good.
David

News:

Author Topic: Registry of 500/550 Owners (Three Tons of fun!!) (Read 216695 times)

Bwatson